2'x4' - 1:10 Scale 4S - Frame ONLY - RC Ramp Jump - Up to 1/8 Scale - 40°-60°

0 5 4 10

10 calificaciones

Style:

Frame Only - DIY

Disponibilidad
En stock

Peso con empaque
2.34 kg

Devolución
No

Condición
Nuevo

Producto de
Amazon

Sobre este producto

**Frame Only** - Supply your own ramp deck, 1/8" Masonite for normal use or 1/8" Lexan for hard bashing. Home Depot has Masonite pre-cut to 2'x4' (24"x48") sizes for only $7 ea. Search Home Depot for 1/8 in. x 2 ft. x 4 ft. Tempered Hardboard... Or step up to 1/8" Lexan (polycarbonate) for about $50 here on Amazon, which is stronger but requires holes to be chamfered for the included flat head screws. HDPE and ABS will also work, but Lexan is the toughest, longest lasting deck. Do *NOT* get pexiglass (acrylic).
Best for 1:10 scale, but works up to 1:8 Scale RC cars/trucks - **Assembly Required** Check out our store for smaller RTR (ready to run) ramps and our new Heavy Duty ramps for 1:8 and 1:5 scale trucks. - It takes 30-40min. to assemble frame, drill deck through pilot holes in frame, screw down deck and assemble legs. Lexan will take closer to 60 min. to chamfer the holes during assembly.
For 1/10 scale a single sheet of 1/8" masonite is good, use two layers for 1/8 scale cars. Masonite (hardboard) is nice because it's cheap and easy to assemble, has a textured side for low speed backflips and good weather resistance. If you plan on bashing hard then step up to one sheet of 1/8" lexan for a longer lasting deck. HDPE is generally white and good for 1:10 scale, or ABS is black and works a little better, but Lexan is king and you can also paint it to any color.
This 2'x4' (24"x48") ramp is the perfect size to transport to your favorite spot and be wide enough to easily hit from any driving angle. Setup only takes a minute and it folds down to 5" tall. Weighs 10-15 lbs. depending on kit.
Made in USA! -- Aluminum frame (also made in USA) is easy to assemble, start feet hold ramp solid at any angle, leg feet keep it planted. For high speed hits the ramp will need support to hold it in place, packing dirt behind it or adding sand bags will hold it solid.
Adjustable legs - 40° is a good long kicker (20-40'), 50° angle high jump launches well over 10' high, 60° angle is great for low to med. speed back flips. 1/8 scale will work on larger 1/5 scale RC trucks, but not for full speed hits.
This is a new product we are still fine tuning - Made in USA! - 4/25/25 update - Changed terminology that ramp is better for 1:10 scale. New 1:8 and 1:5 scale ramps are now available, check out our store to see the other ramps we offer, or message us with any questions.

$334,69

44% OFF

$185,94