









Artículo: AMZ-B0DGPZB66V
BETAFPV Air Brushless Flight Controller 1S AIO Lightweight FC Built-in Serial ELRS RX with G473 CPU 16MB BlackBox BB51 Bluejay 96K ESC OSD Chip External UART Port for 1S FPV Whoop Quadcopter - 5IN1
En stock
0.20 kg
No
Nuevo
Amazon
- Air Brushless Flight Controller, the first 1S FC that utilizes the G473 processor, experienced a remarkable 55% increase in computing speed and lightning-fast response times for precise racing and complex freestyle maneuvers, surpassing the F411
- Higher integration yet lightweight design, featuring a custom miniature OSD chip. Weighing only 3.6g (5IN1 Version), it offers extra UART port options for effortless function expansions, adapting flawlessly to any flight scenario
- Default integrated onboard 25-400mW VTX. Streamlines installation saves space, reduces weight, and boosts convenience for VTX and FC adjustments. The 5IN1 Version even integrates the Serial ELRS 2.4G RX
- Elevate your drone's precision with the industry-leading ICM42688P gyro, integrated accelerometer, cutting-edge sensor calibration, and filtering algorithms, and a sample rate of up to 8K, which takes the drone's posture and movement accurate and precise drone to the next level
- Unlock extensive flight data recording and analysis with an impressive up to 16MB capacity black box. Maximize performance and diagnose faults effectively, leveraging the full potential of your drone
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conoce más detalles
Attention 1. VTX Power: Higher VTX power consumes more energy and generates more heat, reducing flight time. For better flight time in indoor scenarios, use 25~100mW power. 2. Motor Wiring: Only soldering is supported for motor wiring on the flight control. Avoid terminal plugging. 3. VTX Antenna: Connect and install the image transmission antenna before powering on the flight control. Alternatively, set transmission power to 0 to avoid burn out. Specification of FC Weight: 3.6g(5IN1 Version) Mounting Hole Size: 26mm x 26mm CPU: STM32G473CEU6 (168MHz) Six-Axis: ICM42688P (SPI connection) Blackbox Memory: 16MB Sensor: Voltage&Current 5V BEC*: 5V 3A USB Port: SH1.0 4-Pin Built-in ESC with 5A continuous RX: Serial ELRS 2.4G (V3.4.3) (Only 5IN1 Version) 5IN1 Version: FC+ESC+OSD+VTX+RX Specification of ESC Input Voltage: 1S FC Firmware Version: Betaflight_4.5.0_BETAFPVG473 ESC Firmware: A_X_5_96KHz_V0.19.hex for BB51 Bluejay hardware Signal Support: D-shot300, D-shot600 Specification of VTX Output Power: 25/100/200/400/PIT Frequency: 5.8GHz 48 channels, with Raceband: 5658~5917MHz Channel SEL: SmartAudio2.0 Modulation Type: FM Frequency Control: PLL All Harmonic: Max -50dBm Frequency Stability: ±100KHz (Typ.) Frequency Precision: ±200KHz (Typ.) Channel Carrier Error: ±1.5dB Antenna Port: 50 Ω Operating Temperature: -10℃~+80℃ Recommend Parts Drones: Air65, Air75 Frames: Air65, Air75, Meteor65, Meteor65 Pro, Meteor75 Pro Motors: 0702/0702SE, 0802/0802SE, 1102 Receiver: ELRS Lite Receiver, ELRS Nano Receiver Package 1 * Air Brushless Flight Controller - 5IN1 Version 1 * Type-C to SH1.0 Adapter 1 * SH1.0 4Pin Adapter Cable 1 * 5.8g VTX Antenna 1 * BT2.0 U Whoop Cable Pigtail | 40mm 4 * M1.4*4 Self-tapping Screws 4 * Shock Absorbing Ball