Artículo: AMZ-B0CP78SNCF

8-Channel AD5593 Converter 12-Bit Analog-to-Digital Converter (Lile HFN 3047) I2C Interface

Disponibilidad
En stock
Peso con empaque
0.42 kg
Devolución
No
Condición
Nuevo
Producto de
Amazon

Sobre este producto
  • 8-Channel AD5593 Converter ADC/DAC Configurable 12-Bit Analog-to-Digital Converter
$67,48
55% OFF
$30,67

IMPORT EASILY

By purchasing this product you can deduct VAT with your RUT number

$67,48
55% OFF
$30,67

10% OFF en compras mayores a $100 con Tarjetas Banco Pichincha

Envío gratis
Llega en 12 a 16 días hábiles
Con envío
Tienes garantia de entrega
Este producto viaja de USA a tus manos en
Medios de pago Tarjetas de Débito y Crédito

Compra protegida

Disfruta de una experiencia de compra segura y confiable

Conoce más detalles

Product Features The AD5593R integrates eight I/O pins that can be individually configured as DAC outputs, ADC inputs, digital outputs, or digital inputs. When the I/O pin is configured as an analog output, it is driven by a 12-bit DAC. The DAC output range is 0 V to VREF, or 0 V to 2 x VREF. When the I/O pin is configured as an analog input, it is connected to a 12-bit ADC through an analog multiplexer. The ADC input range is 0 V to VREF, or 0 V to 2 × VREF. The I/O pins can also be configured as general purpose digital input or output (GPIO) pins. The GPIO pin status can be set or read back by accessing the GPIO registers via an I2C write/read operation. The AD5593R integrates a 2.5V, 20 ppm/°C reference (default off) and a temperature indicator (indicating chip temperature). The temperature value is read back as part of the ADC read sequence.|Product Parameters ADC offset error: ±5mV ADC conversion time: 2us ADC full power bandwidth: 8.2MHz 3dB DAC offset error: ±3mV DAC input full 0 error: 2mV Reference voltage VREF input: 1 ~ VDD Reference voltage VREF output: 2.5V Temperature sensor accuracy: 12 bits Temperature sensor temperature range: -40 ~ 105 ° C Measurement error: ±3 °C Power supply VDD: 2.7 ~ 5V IIC communication frequency: up to 400KHz Pin Description VCC: Positive power supply SCL: IIC clock signal line SDA: IIC data signal line RES: Chip reset terminal, active low ADD: 7-bit slave address minimum selection bit IO0 to IO7: Octal digital or analog signal input/output (internal register setting) VRE: Reference voltage input and output (when the internal setting is enabled). When the internal is not enabled, an external test voltage of 1V to VCC is required.

Mega deals
Ver más