CS4 Portable PCP Air Compressor, 350W Powerful Motor,Max 5800Psi/40Mpa, Water and Fan Cooling, 5 Hours Continous Work, 12V Auto Stop Paintball Air Compressor

0 5 4 206

206 calificaciones

Disponibilidad
En stock

Peso con empaque
13.23 kg

Devolución
No

Condición
Nuevo

Producto de
Amazon

Sobre este producto

This CS4 pcp air compressor has a new upgraded 350W motor , and adopts four-stage compression technology. It is very stable when working, and it is very quiet with only 70db. Maximum filling 5800Psi/40Mpa.Notice :First confirm the maximum safe pressure of your gas cylinder, do not over-inflate, otherwise it will cause safety problems. At the same time, it is equipped with a double-pointer pressure gauge, and the two-level setting auto-stop pressure, which is more secure.
A water tank and a grease tank are designed on the top of the compressor. The excellent cooling can achieve 5 hours of continuous work and can fill a 3L gas cylinder. Note: For the first use, it must be filled with about 500ml of neutral distilled water or antifreeze ( PH is about 7).Note: 1) Be sure to add neutral antifreeze if it freezes in your area. 2）:Do not turn the grease knob until after 4-6 hours of use, otherwise will cause bad performance. then turn it one turn. Search "how to add coolant for cs4" on youtube to learn the correct steps.
15% Faster Filling Speed: Filling 0.5L tank from 3000Psi to 4500psi ,only needs 4-5 minutes. Filling 0.5L from 0-4500psi, only needs 14-16 minutes. Filling 6.8L from 0 -4500psi, needs 2 hours and 40 minutes. Notice: CS4 and CS4-I are mainly used for high pressure, small gas cylinders below 6.8L, especially PCP. It is not recommended to fill large gas cylinders. Otherwise, you can choose 5K1 and 5K2.
12V DC input, you can use car battery or household outlet for power supply, equipped with 110V-12V converter. The machine is equipped with a built-in oil-water separator which never needs to be replaced, so you don't need to buy other external oil-water separators.
Please read user manual carefully before turning on compressor. Quick connector : M10*1, 8MM female connector. Product size: 11.8*6.1*12.4 inch , weight: 29lb. ATTENTION: when filling is complete, please close the bottle valve first (when filling bottle) and then open compressor's bleed valve to release line pressure . All pressure must be released from compressor before starting.
Note: when add coolant first time, add full tank, turn on switch (don't press start button), water pump will run, coolant will flow into inner water pipes, then keep adding more coolant until water tank is full.

$1.242,52

44% OFF

$690,29