Garantía de entrega
Bestong
Belt Grinder D-backing plate for 2x72" knife making grinder with bolt axles
Disponibilidad
En stock
En stock
Peso con empaque
2.13 kg
2.13 kg
Devolución
No
No
Condición
Nuevo
Nuevo
Producto de
Amazon
Amazon
Sobre este producto
- D-shaped backing plate for flat platten assembly, this one with even deeper reach for slack belt grinding.
- Wheel mounting holes are 1/2"-13 precision tapped to ensure that axles are perpendicular to the plate. the slots for a flat platten mounting bracket are 1/4" wide & 6" apart, the u-shaped adjusting slot accepts a 3/8" bolt or stud. The axle holes are 10.5" center to center apart; if you mount two 2" diameter wheels on this backing plate you can easily mount an 8" long by 2-1/2" wide flat platten between the wheels for a large grinding surface.
- The rectangular spacer plate is 1/8" thick, this effectively makes this plate 1/2" thick through the pivot point & therefore interchangeable with any 1/2" thick d-plate.
- M10 holes in the holes for the roller are pulled in the teeth Holes are grooved
- include 2 grade 8 bolts, 3,5" long, with 4 nylon spacers, 2 1/2" washers & 2 half-nyloc nuts.
$51,95
31% OFF
$35,83
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
$51,95
31% OFF
$35,83
10% OFF en compras mayores a $100 con Tarjetas Banco Pichincha
Envío gratis
Llega en 5 a 12 días hábiles
Con envío
Tienes garantia de entrega
Este producto viaja
de USA ![]()
a tus manos en
![]()
a tus manos en
Compra protegida
Disfruta de una experiencia de compra segura y confiable
![]()
Garantía de entrega
Con Tiendamia todas tus compras cuentan con Garantía de Entrega o devolución total de tu dinero.
Compras 100% seguras y garantizadas, para que pidas lo que sueñas y lo recibas del mundo a tu puerta.
Tarjetas de Débito y Crédito
Visa
Mastercard
American Express
Dinners
Discover
Alias
Pagos a través de PayPal
Compra procesada en dólares con dinero en cuenta o tarjetas internacionales.
PayPal
Conoce más detalles
D-shaped backing plate for flat platten assembly, this one with even deeper reach for slack belt grinding. Wheel mounting holes are 1/2"-13 precision tapped to ensure that axles are perpendicular to the plate. the slots for a flat platten mounting bracket are 1/4" wide & 6" apart, the u-shaped adjusting slot accepts a 3/8" bolt or stud. The axle holes are 10.5" center to center apart; if you mount two 2" diameter wheels on this backing plate you can easily mount an 8" long by 2-1/2" wide flat platten between the wheels for a large grinding surface. The rectangular spacer plate is 1/8" thick, this effectively makes this plate 1/2" thick through the pivot point & therefore interchangeable with any 1/2" thick d-plate. M10 holes in the holes for the roller are pulled in the teeth Holes are grooved include 2 grade 8 bolts, 3,5" long, with 4 nylon spacers, 2 1/2" washers & 2 half-nyloc nuts.
