Reboot Plasma Cutter RBC6000DL PRO, 60 Amp Non Touch Pilot Arc Plasma Cutter Machine, 5/8 inch Clean Cut 4/5 inch Severance Cut, Dual Voltage 120V/240V with Consumables, Upgrade Digital Display

0 5 4 1174

1174 calificaciones

Pattern Name:

8GEN Non Touch PRO-60A

Disponibilidad
En stock

Peso con empaque
7.36 kg

Devolución
No

Condición
Nuevo

Producto de
Amazon

Sobre este producto

8GEN NON-TOUCH PILOT ARC PLASMA CUTTER: Cuts without direct contact between tip and metal, resulting in improved cut quality and longer consumable life; requires air compressor (90 PSI, 60L/min, 750W or more)
LARGE DIGITAL LED SCREEN: Display parameters air pressure, pilot arc, post air, current, allowing users to understand the equipment status in real time and adjust operations in a timely manner; error code system, making it easy to find out the problems
CUTTING THICKNESS: 14 mm at 35A 120V, 50 PSI; 20 mm at 60A 240V 60 PSI; IGBT inverter, 50/60Hz high frequency; dual voltage 120/240V, current range at 120V is 15-35A, 240V is 15-60A; circuit breaker: 50A at 120V, 30A at 240V
APPLICATION: Except for general metals, easily cuts through rough, painted and rusted surfaces can be cut easily with minimal slag, mesh cutting is also suitable
AIR PRESSURE SENSOR: Match the appropriate air pressure to the current, green light indicates normal air pressure range, red light means too high or too low. Adjust the air pressure using the regulator
ADVANTAGES: This type of cutting improves the quality of the cut, with a slightly narrower cutting surface, a flatter surface and less distortion

$236,32

11% OFF

$210,59