Wireless WiFi Doorbell Smart Intercom Video Camera Door Ring Bell Chime Security,Security HD Camera Bell

Conoce más detalles

Features:

1. Press the doorbell to quickly start and push messages.

2. Ring the doorbell for real-time screen intercom

3. Ultra low power consumption, ultra long standby.

4. Quick capture

5. The graffiti app supports taking photos and recording videos

6. Infrared night vision function

7. Support for traditional indoor Dingdong reminder function

8. Support TF card, up to 64G.  [not included]

9. Support unlimited multi person sharing and binding

10. The battery can be replaced or directly charged for battery life

12. Two bases can be selected for installation, making it convenient for suitable angles

APP: Tuya

Image sensor: GC0328

Recording resolution: 640 * 480

Visual angle: 85 °

Storage encoding: JPEG

Push photos: supported

Audio information: built-in speakers, microphone

WIFI mode: 2.4GHz 802.11b/g

Night vision type: infrared night vision

Power supply information: DC5V/2A

Working temperature: -10 °~60 °

Working humidity: 10%~90%

TF card: supports up to 64G [not included]

Product battery model: 18650 * 2 batteries [not included]

Product color: white

Door bell weight: approximately 175 grams

Product size: approximately 12.5 * 5cm

Battery life: Approximately 1-6 months [combined with usage]

Battery capacity: 4600 mA

Charging duration: 2-4 hours

Note:

1. Due to transportation issues, the product battery may have undergone insulation treatment. Please tear it off before use

2. If the product requires the installation of a memory card, please choose a new card or a formatted C10 or higher model, or a TF card within 64G, which is not included in the product. The installation position is at the upper end of the battery compartment and is pressed and inserted

3. The product comes with two fixed bases, which can be installed according to your actual situation

4. The product requires 2.4G network support and should be installed in a location with good signal as much as possible

5. If you press the doorbell and Dingdang does not respond when powered on, (1) it eliminates the distance between Dingdang and the doorbell, (2) it can be paired again. Insert Dingdang into the power and press the function button of Dingdang once. When Dingdang has a long red light, press the doorbell once. When Dingdang rings, it indicates successful pairing

Operation installation:

1. Choose a location with good network signal for the product, and the doorbell and jingle should not be too far apart

2. Choose a suitable base. The product is equipped with two bases, one at an angle and one at a straight face

3. Scan the code to download the app, register an account, open Bluetooth on your phone, and click on the app to enter

4. Plug in the Dingdang power and press the doorbell to activate it. When the Dingdang rings, click on the search device in the app and see the doorbell, click on Connect

5. After successful binding, it can be used normally

6. If you need to add a memory card, please install it on the top of the battery compartment with the power off, and it can only support up to 64GB

Product List:

Doorbell * 1

Base * 2

Film * 1

Charging cable * 1

Installation package * 1

Instructions * 1