TDO-XGA084 8.4" Uconnect LCD Display Touch Screen Replacement, Digitizer Screen for Jeep Grand Cherokee 2019-2022, for Chrysler Pacifica RAM Radio OEM Navigation Uconnect 4 Monitor Touchscreen

0 5 4 4

4 calificaciones

Disponibilidad:
En stock

Peso con empaque:
0.73 kg

Devolución:
Sí

Condición
Nuevo

Producto de:
Amazon

Sobre este producto

Replacement OEM Part Number: TDO-XGA084 LCD touch screen compatible with uconnect 4, UAV Navigation Radio Display, if your OEM screen is cracked, delamination, blistering, ghosting and other bad touch, just replace the 8.4 inch lcd screen and digitizer, you won't have to go to the dealer for replacement as he will suggest you to replace the whole radio which will cost thousands of dollars but it is not necessary, just watch the related replacement video
Applicable vehicles: 8.4 Uconnect screen replacement for Jeep Grand Cherokee radio screen 2019 2020 2021 2022, for Chrysler Pacifica radio screen 2019-2020, for RAM 1500 2500 radio screen 2019 2020, Please check the OEM number and size carefully before purchasing to make sure the lcd monitor screen fits your car
EASY PROBLEM SOLVING: If your display screen is cracked, delaminated, blistered, porous, leaking viscous liquid, unresponsive, has garbled touches, phantom images, ghosting, dead pixels, unresponsive, poorly touched, or poorly looking, all it takes is an uconnect screen replacement to restore it to its original functionality without the need for expensive repairs at the dealership, and you're good to go! No need to go to the dealer for expensive repairs
EASY TO INSTALL: This LCD display is designed to be easy to install, just watch the video to REPLACE uconnect touchscreen at home without having to go to an expensive dealer for repairs, it is an affordable alternative to repairs. radio screen with uconnect 8.4 4C oem navigation system Fully compatible. Installs fully plugged into your ribbon cable and in the correct position, make sure you remove the protective film from the screen (can be hard to see)
IMPORTANT INSTALLATION NOTE: Sometimes you may lose some of the functions and icons on your monitor after installation, sometimes the digitizer screen will jump around or ghost after installation, this is normal, nothing is broken. As long as all the cables are connected, and as long as you drive for a day or two, all the computers are synchronised and all the icons will be back to normal. If you experience phantom touch on your new screen, double check the ribbon cable

AR$904,946

44% OFF

AR$502,746