SKU/Artículo: AMZ-B0DXKZMT2R

hiBCTR

hiBCTR 4PCS DC 12V 2 Channel Relay Module with Isolated Optocoupler Supports High and Low Level H/L Level Trigger Module Triggered

Detalles del producto

Disponibilidad:
En stock

Peso con empaque:
0.15 kg

Devolución:
Sí

Condición
Nuevo

Producto de:
Amazon

Viaja desde
USA

Sobre este producto

Product Description Description The module is equipped with genuine - quality relays. The maximum load of the normally - open interfaces is AC 250V/10A and DC 30V/10A. It has a power indicator (green) and a relay status indicator (red). The module size is 50mm * 26mm * 18.5mm (L * W * H). There are four mounting bolt holes with a hole diameter of 3.1mm and a pitch of 44.5mm * 20.5mm. Module Interface DC +: Connect to the positive terminal of the DC 12V power supply. DC -: Connect to the negative terminal of the power supply. IN1: Signal trigger end for Channel 1. You can set high or low level to control the relay. IN2: Signal trigger end for Channel 2. You can set high or low level to control the relay. Relay Outputs NO1: Normally - open interface of Relay 1. It is floating before the relay is activated and is short - circuited with COM1 after activation. COM1: Common interface of Relay 1. NC1: Normally - closed port of Relay 1. It is short - circuited with COM1 before the relay is activated and becomes open after activation. NO2: Normally - open interface of Relay 2. It is floating before the relay is activated and is short - circuited with COM2 after activation. COM2: Common interface of Relay 2. NC2: Normally - closed interface of Relay 2. It is short - circuited with COM2 before the relay is activated and becomes open after activation. Note This relay is triggered by DC 12V and cannot be triggered by a 5V Arduino signal.

Producto prohibido

Este producto no está disponible

Este producto viaja de USA

a tus manos en

Medios de pago

Conoce más detalles

The module allows users to set high or low level trigger via a jumper, meeting the requirements of various trigger applications. Featuring patch optical isolation, the module has strong drive ability and stable performance. Users can set the module to be triggered by high or low level through a jumper. The interface design is user - friendly, and all interfaces can be directly connected via terminal wiring leads for great convenience. With fault - tolerant design, the relay won't operate even if the control line is broken.

hiBCTR 4PCS DC 12V 2 Channel Relay Module with Isolated Optocoupler Supports High and Low Level H/L Level Trigger Module Triggered

Conoce más detalles

hiBCTR 4 Channel Relay Shield for arduino uno r3-5v arduino Relay Module with 4 Channels

hiBCTR 4 Packs 5V One Channel Relay Module Relay Switch with OPTO Isolation High Low Level Trigger.

hiBCTR 4CH 24V Relay Module OPTO-Isolated - High/Low Level Trigger 10A 250VAC for PLC/Arduino/Raspberry Pi Industrial Control

hiBCTR 12v Relay Module 4 Channel with opto-Isolated high and Low Level Trigger for Router switchbot and Relay Board

hiBCTR 2PCS DC 12V 2 Channel Relay Module with Isolated Optocoupler Supports High and Low Level H/L Level Trigger Module Triggered