SKU/Artículo: AMZ-B0D93ZFVPY
Debugger Programmer for JTAG, Downloader Supports Two Modes of MDK JTAG/SWD,Virtual Serial Port, Applicable to GD32/STM32, etc.
En stock
0.33 kg
Sí
Nuevo
Amazon
- 【Widely Applicable】The downloader is suitable for the entire ARM Cortex-M series, including GD32/STM32, etc.
- 【Supports MDK JTAG/SWD Modes】Standard 20PIN JTAG/SWD can be used without installing drivers; supports MDK compilation download.
- 【Supports Virtual Serial Port】SWD debugging port, 2.54mm pitch, four-wire without reset; UART virtual serial port, 2.54mm pitch, four-wire.
- 【Supports Connect to Small System Boards】Equipped with a dedicated 20cm adapter cable for small system boards, the dedicated SWD port can directly connect to small system boards via the dedicated cable. Supports debugging and downloading.
- 【Package Includes】1pcs DAP-Link V1 downloader; 1pcs Acrylic and copper pillar screws and nuts (not pre-installed by default);1pcs 20cm 2.54mm pitch to 2.0mm pitch adapter cable;1pcs 15cm 2.54mm pitch standard DuPont cable set (4 wires, 2 sets);1pcs 50cm angled Type-C USB data cable;1pcs 20cm 2.54mm pitch 20-pin standard JTAG FC gray ribbon cable
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conoce más detalles
Specification: Power Current: 20-30mA Power Voltage: 5V Dimensions: 45mm*65mm Functions: 1. Supports ARM Cortex-M series core chips, including GD32/STM32. 2. Comes with a USB virtual serial port / two-in-one. 3. Standard 20PIN JTAG/SWD can be used without installing a driver. 4. Supports MDK compile download. 5. SWD dedicated port can be directly connected to small system boards through a dedicated cable. Package Includes 1pcs*DAP-Link V1 downloader 1pcs*Acrylic and copper pillar screws and nuts (not pre-installed by default) 1pcs*20cm 2.54mm pitch to 2.0mm pitch adapter cable 1pcs*15cm 2.54mm pitch standard DuPont cable set (4 wires, 2 sets) 1pcs*50cm angled Type-C USB data cable 1pcs*20cm 2.54mm pitch 20-pin standard JTAG FC gray ribbon cable