5V - 24V Motor Controller Motor Forward/Reverse Controller Timing Delay Time Cycles Relay
En stock
0.15 kg
Sí
Nuevo
Amazon
USA
- Port: DC 5.5MM female : Power supply 1, DC 5V power supply. VIN: Power 2 positive, DC 6.5-25V power supply GND: Power supply 2 negative FWD: Forward input control (partial Function-Mode is invalid) : Reverse input control (partial Function-Mode is invalid) STOP : Stop input control (partial Function-Mode is invalid) M+: Motor positive M-: Motor negative P+: Positive terminal for motor power supply P-: negative terminal for motor power supply Specification: Power supply: DC 6.5-25V, DC 5V Working current: 83mA Standby current: 41mA Relay load current: <5A Delay time: 0.1-.9 seconds, 1-9 seconds, 1-9 minutes Size: 8*5cm/3.2*2in Weight: Approx. 51g/1.8oz mode: 1 low pulse (falling ) 2 low (rising ) Timer: T1: Forward timer T2: Reverse timer T3: Stop timer Time unit : 0.1 second, 1 second, 1 minute Relay action: Motor forward : Relay 1 is ON, relay 2 is OFF, and the F LED indicator is flashing. Motor reverse : Relay 1 is OFF, relay 2 is ON, and the R LED indicator is flashing.. Motor stop : Relay 1 is OFF, relay 2 is OFF, and the S LED indicator is flashing. Factory settings: Press the ++ and -- buttons simultaneously for 5 seconds. Energy-saving mode: Press and hold the OK button for 5 seconds to enter the Energy-saving mode. Press and hold the OK button again for 5 seconds to exit the Energy-saving mode. Energy saving mode just turns off the digital tube and LED indicator, and other functions are normal. Package list: 1 x Motor Controller board
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conoce más detalles
This is a multi-function DC/AC motor forward and reverse controller with multiple control modes. Many control functions can be derived through reasonable settings. power supply (two power supplies cannot be powered at the same time): Power supply 1, DC 6.5-25V; Power supply 2, DC 5V. Working current: (Normal Mode) standby current 41mA, working current 83mA; (Energy-Saving mode) Standby current 7mA, working current 44mA. Relay load current, recommended less than 5A. There are three input control port: forward control(FWD), reverse control(), and stop control(STOP). Two input modes: Low-Pulse mode and Low- mode, Delay time: 0.1-.9 seconds, 1-9 seconds, 1-9 minutes. Cycle times: no cycle, 2-99 cycles, always cycle.