Adjustable Timer Module 3V 3.7V 4.5v 5v 6v 7.4V Cycle Timer Control Relay Time Delay Switch Module 64.2x34.8x15mm
En stock
0.15 kg
Sí
Nuevo
Amazon
USA
- Specification: Working current: DC 3V~7V Voltage range with jumper: 3 V~5.5V Voltage range without jumper: 3.8V~7V source: DC 3V~12V (commonly use power supply positive , button, PNP sensor, PLC , etc.) Output capacity: Can control equipment within DC 30V3A or AC 220V3A Quiescent current: 15mA Working current: 30mA Service life: >100,000 times Operating temperature: -40?~85? Size: 64.2*34.8*15mm / 2.5*1.4*0.6in Weight: 22g / 0.8oz (approx.) Package list: 1 * Module Function: Delay time range:Minimum 0.1 seconds, maximum minutes, adjustable. P-1: relay is energized, and when time is over, relay is de-energized; during the period of delay: A: again is invalid B: again can start a new timing C: again will cause relay to reset and end timing P-2: starts timing for T1, when time is over, relay is energized for T2 then de-energized (reset) P-3: Cycle:Energized for T1, de-energized for T2, infinite cycle.Time of T1 and T2 are both adjustable. A: After powered on, relay is first energized then de-energized for a infinite cycle B:After powered on, relay is first de-energized then energized for a infinite cycle P-4: When there is , relay is energized; when disappears, it start timing, and relay is de-energized when time is over. During the period of delay, if appears again, it cancels delay; and when disappears, it start timing again.
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conoce más detalles
Low Voltage Power Supply: This time delay relay can be powered with low voltage, minimum to 3V. Commonly-used 3.7V lithium batteries, 5V power banks, switching power supply can be used to power this board. Working Current: DC 3V~7V. Voltage range with jumper: 3 V~5.5V. Voltage range without jumper: 3.8V~7V. source: DC 3V~12V (commonly use power supply positive , button, PNP sensor, PLC , etc.). Output capacity: Can control equipment within DC 30V3A or AC 220V3A. Quiescent current: 15mA Working current: 30mA Strong Anti Interference Ability: Output optical coupling isolation improves anti-interference ability. Data Saving Function: The module uses industrial level circuit board, and set parameters will be saved after power failure. Application: Widely used to control motors, light bulbs, LED belts, DC motor, small pumps, etc.