Fafeicy Timer Switch Module, Adjustable Cycle Delay, 5V-36V, 15A, 400W, Automatic Operation, Normally Open Contact, Silver Material, Mount, 40C to 85C, Delay, Timer Relay Module
En stock
0.15 kg
No
Nuevo
Amazon
USA
- Specifications: Voltage: DC 5V~36V. Trigger Source: High voltage level trigger (3.0V~24V), ground and system ground are not on common ground to improve the system's anti-jamming capability (you can also connect them on common ground). Output Capacity: DC 5V~36V, at room temperature, continuous current is 15A, power 400W. With enhanced heat dissipation, the current can be up to 30A. Quiescent Current: 20mA Operating Current: 50mA Working Temperature: -40℃~85℃ Clocking (Time Delay) Range: 0.1seconds to 999minutes Size: 60*34*12mm / 2.36*1.33*0.47 Note: 1. The module is an active output, the output voltage equal to the input voltage. 2.'DC + 'and' load + ' are internally shorted(connected), but' DC- 'and' load - ' cannot be shorted, otherwise the load cannot be controlled , which is equivalent to load being powered on always. Package Includes: 1 x Timer Switch Module
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conoce más detalles
Sleep Mode:
1. C-P Sleep mode: five minutes without any operation, the digital display automatically turns off, the program running as usual;
2. O-d Normal mode: digital display turns on always;
Press hand hold the STOP button for two seconds to switch C-P and O-d state, the current state flashes and then return to the main interface.
Specifications:
Voltage: DC 5V~36V.
Quiescent Current: 20mA
Operating Current: 50mA
No noise : No noise was made during turning on/off, no spark, and no electromagnetic interference
[High availability] Compared with ordinary electromagnetic relay modules, this timer relay module has a longer service life. MOS parallel active output, low internal resistance, high current, high power; at room temperature, the working current is up to 15A, and the power is up to 400W, which can be used in most devices.
[Easy to use] You can set different OP, CL, LOP parameters, which are independent of each other and saved separately. In the event of failure, all parameter settings will be automatically saved.
Wide voltage input from 5V to 36V, normally used for controlling DC motors, lights, LED strips, micro-, solenoid valves, etc., very convenient.It has an emergency stop function (STOP button) and reverse input .Automatically enter sleep mode and shut off display if no in 5 minutes, and will be wake up by pressing any button.You can set different OP, CL, LOP parameters, which are independent of each other, and are saved separately;