Jessinie
C8051F320 Single Chip Development Board Mixed Signal ISPFLASH Microcontroller Module Board CJMCU-5132 UART 5V Single Chip Microcomputer
Disponibilidad:
En stock
En stock
Peso con empaque:
0.33 kg
0.33 kg
Devolución:
Sí
Sí
Condición
Nuevo
Nuevo
Producto de:
Amazon
Amazon
Sobre este producto
- The C8051F320 /1 series utilizes the proprietary CIP-51 microcontroller core of Silicon Labs. The CIP-51 is fully compatible with MCS-51M instruction sets; Software can be developed using standard 803x / 805x assembler and compiler
- The CIP-51 core provides all the peripherals that come with the standard 8052, including four 16-bit counters/timers, full-duplex UART with extended baud rate configuration, enhanced SPI ports, 2304-byte on-chip RAM, 128-byte Special Function Register (SFR) address space and 25/21 I/0 pins.
- 10-Bit ADC, Up to 200 ksps, Up to 17 or 13 external single-ended or differential inputs ,VREF from external pin, internal reference, or VDD
- USB specification 2.0 compliant, Full speed (12 Mbps) or low speed (1.5 Mbps) operation, Voltage Regulator Input: 4.0 to 5.25 V
- C8051F320 Single Chip Development Board built-in temperature sensor, External conversion start input, Two Comparators, Internal Voltage Reference, POR/Brown-Out Detector
AR$30,888
44% OFF
AR$17,164
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
AR$30,888
44% OFF
AR$17,164
Pagá fácil y rápido con Mercado Pago o MODO
Llega en 8 a 12 días hábiles
con envío
Tienes garantía de entrega
Este producto viaja
de USA ![]()
a tus manos en
![]()
a tus manos en
Compra protegida
Disfruta de una experiencia de compra segura y confiable
Tarjetas de Crédito y Débito
Visa
Mastercard
American Express
Pagos a través de PayPal
Compra procesada en dólares con dinero en cuenta o tarjetas internacionales.
Paypal
Pagos a través de MODO
Compra procesada en pesos desde la App de tu banco.
PayPal
Conoce más detalles
USB Function Controller USB specification 2.0 compliant Full speed (12 Mbps) or low speed (1.5 Mbps) operation Integrated clock recovery; no external crystal required for full speed or low speed Supports eight flexible endpoints 1 kB USB buffer memory Integrated transceiver; no external resistors required On-Chip Debug On-chip debug circuitry facilitates full speed, non-intrusive in-system debug (no emulator required) Provides breakpoints, single stepping, inspect/modify memory and registers Superior performance to emulation systems using ICE-chips, target pods, and sockets Voltage Regulator Input: 4.0 to 5.25 V High Speed 8051 µC Core Pipelined instruction architecture; executes 70% of instructions in 1 or 2 system clocks Up to 25 MIPS throughput with 25 MHz clock Expanded interrupt handler Memory 2304 bytes internal RAM (1k + 256 + 1k USB FIFO) 16 kB Flash; In-system programmable in 512-byte sectors Digital Peripherals 25/21 Port I/O; All 5V tolerant with high sink current Hardware enhanced SPI, enhanced UART, and SMBus serial ports Four general purpose 16-bit counter/timers 16-bit programmable counter array (PCA) with five capture/compare modules Real time clock mode using external clock source and PCA or timer Clock Sources Internal Oscillator: 0.25% accuracy with clock recovery enabled. Supports all USB and UART modes External oscillator: Crystal, RC, C, or Clock (1 or 2 pin modes) Can switch between clock sources on-the-fly; useful in power saving strategies Temperature Range: –40 to +85 °C
