SKU/Artículo: AMZ-B09Q3P89JF

waveshare

2.13inch Touch e-Paper Display with ABS Case for Raspberry Pi Zero 2 W/Raspberry Pi Zero/Pi Zero W/Pi Zero WH, 250x122 Pixels E-Ink, Paper-Like Effect Support Partial Refresh

Color:

2.13" Touch e-Paper with Case

2.13" Touch e-Paper

2.13" Touch e-Paper with Case

2.13-Red/Yellow/Black/White 4 Colors

2.9" Touch e-Paper

Detalles del producto

Disponibilidad:
En stock

Peso con empaque:
0.15 kg

Devolución:
Sí

Condición
Nuevo

Producto de:
Amazon

Viaja desde
USA

Sobre este producto

Overview 2.13"capacitive touch e-Paper display, 5-point touch, 250×122 pixels.Display color: black, white Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W. Supports waken up by user-defined gesture. No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. Heat dissipation holes on the back,combined with thermal tape, effective heat dissipation. Specifications operating voltage--3.3V grey scale --2 interface--3-wire SPI, 4-wire SPI partial refresh time-- 0.3s full refresh time --2s display size --48.55 × 23.70mm refresh power --26.4mW(typ.) resolution --250×122 pixels viewing angle -->170° display color --black, white Touch point --5 (max) outline dimensions-- 69.15 × 38.90mm dot pitch --0.194 × 0.194mm standby current --<0.01uA (almost none) Online Tutorial/Online Document: n9.cl/wq54w Package Content 2.13inch Touch e-Paper HAT x1 ABS case x1 Screwdriver x1 Thermal tape x1 rubber feet 4PCS x1 Screws x2

Producto prohibido

Este producto no está disponible

Este producto viaja de USA

a tus manos en

Medios de pago

Conoce más detalles

2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels.Display color: black, white. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W. Supports waken up by user-defined gesture. No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. Heat dissipation holes on the back,combined with thermal tape, effective heat dissipation. Outline dimensions(Module): 69.15 × 38.90mm. Outline dimensions(Driver Board): 59.51mm × 34.00mm. Display area: 48.55mm × 23.71mm. Operating Voltage: 3.3V (V1.1 support 5V). Communication interface: SPI. Dot pitch: 0.194 × 0.194mm. Greyscale: 2. Partial refresh time: 0.3s. Full refresh time: 2s. Refresh power: 26.4mW(typ.). Touchpoints: 5 (MAX). Touch type: Capacitive touch. Touch interfaced: I2C. Touch panel: Toughened Glass . Comes with development resources and manual (examples for Raspberry Pi).

2.13inch Touch e-Paper Display with ABS Case for Raspberry Pi Zero 2 W/Raspberry Pi Zero/Pi Zero W/Pi Zero WH, 250x122 Pixels E-Ink, Paper-Like Effect Support Partial Refresh

Conoce más detalles

waveshare 2.13inch E-Ink Display HAT V4 Version Compatible with Raspberry Pi Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH, 250x122 Resolution SPI Interface Supports Partial Refresh

2.13inch E-Ink Display HAT V4 Version, Black/White Two-Color 250x122 Pixel E-Paper Module for Raspberry Pi 5/ 4B/3B+/3B/2B/A+/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, Support Partial Refresh

waveshare 2.13inch E-Ink Raw Display Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W Series Boards 250x122 Resolution SPI Interface Without PCB Supports Partial Refresh

waveshare Three Color 2.13inch E-Ink Display HAT (B), 212x104 Resolution 3.3V/5V Red Black White E-Paper Display Screen for Raspberry Zero/Zero W/Zero WH/2B/3B/3B+ SPI Interface,Full Refresh

Waveshare 2.13inch Touch E-Paper E-Ink Display HAT Compatible with Raspberry Pi Zero/Zero W 250×122 Pixels with ABS Protection Case Supports Partial Refresh

Waveshare 2.13inch E-Paper, Compatible with Raspberry Pi 5/4B/3B+/3B/ and Zero Series Boards, E-Ink Screen for Pwnagotchi Kit, SPI Interface, HAT+ Standard

2.13inch E-Ink Display HAT V4 Version, 250x122 Resolution 3.3V/5V Black White Two-Color e-paper Screen Module for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B, Supports Partial Refresh, SPI Interface

waveshare Four Color 2.13inch E-Ink Display HAT (G), 250x122 Resolution 3.3V/5V Red Yellow Black White E-Paper Display Screen for Raspberry Pi/Jetson Nano/Arduino/STM32, SPI Interface

waveshare 2.13inch E-Ink Display HAT Compatible with Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH, 212x104 Resolution Three-Color SPI Interface

2PCS Waveshare 2.13inch E-Ink Display HAT V4 Version Compatible with Raspberry Pi 5/4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W, 250x122 Resolution SPI Interface Supports Partial Refresh

2PCS 2.13inch E-Ink Display HAT V4 Version, Black/White Two-Color 250x122 Pixel E-Paper for Raspberry Pi 5/4B/3B+/3B/2B/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, Support Partial Refresh