DieseRC DC 12V Wireless Relay Remote Control Switch 433MHz RF 4 Channels Relay Receiver Board with 2 Transmitters for Truck Trunk Motor Garage Door Electric Lock, 3 Operating Modes
En stock
0.17 kg
Sí
Nuevo
Amazon
USA
- Package includes: 1 x relay receiver card (with case). 2 x transmitters (contains one battery). 1 x product manual. Parameter: - Receiver operating voltage: DC 12 V. - Input / Output Vlotage: 1~250V - Rest current: <5MA - Maximum current: 10A - RF frequency: 433MHz - Operating temperature: -30~+80 - Receiving sensitivity: >97dBm - Number of remote controls: 20 pieces - Support encoding: 1527 leaning code. - RF operating mode: ASK wireless reception superheterodyne - Reception range: the open space is more than 50 metres. - Pin: COM,NO,NC - Operation mode: Momentary / Toggle / Locked Mode - Battery: 2 x CR2016 (included). Use (operating mode): Momentary Mode: 1. Press a button and hold it, the relay "1" will turn on; 2. Release the button, this relay "1" will turn off. Toggle Mode: 1. Press the button "A", the relay "1" turn on; 2. Press the "A" button again, this relay "1" will turn off f. Locked Mode: 1. Press the "A" button, the relay "1" will light up; 2. Press the "B" button, the relay "2" turns on, at the same time the relay "1" turns off. Reset: Press the learning button (on the receiver) 8 times. success. Note: After reset, all remote controls can no longer work. Configuration 1. Press the learning button (once for momentary mode, twice for toggle mode, 3 times for locked mode). Wait 3 seconds; 2. Press the "A" button. Success Note: This item has already been configured to toggle mode. If you want to change the operating mode, please reset it first.
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conoce más detalles
【Super Design】 433MHz RF wireless remote control. Stable and reliable performance with high reception sensitivity (> 97dBm) Radio frequency signal transmission. You can remotely control each machine connected to the relay receiver via the transmitter. Strong signal can pass through walls, floors, doors, etc. It can be controlled within 50 meters in open area. The chip code is learning code EV1527 which makes the system more secure. 【Easy to Use】Extremely easy to set up and reset. There are 3 operating modes (momentary/toggle mode) that can be configured. You can easily configure yourself according to your request. Product operating mode is adjustable. This item has already been configured in toggle mode. It can also be configured in mix mode. Such as 2 channels in momentary mode and 2 channels in toggle mode. 【More Flexibility】This receiver contains 4 relays and there are 3 terminals (normally open, common, normally closed) for each relay. These 4 relays are independent, so you can control each of them independently. Each receiver can store about 20 transmitters. And one transmitter can control multiple receivers. For example, you can use two relays to control the station door and the other two to control the lights. 【Quality assurance】 High quality relay can be used more than 100,000 times. Let this product more durable and stable to use. The high power blue terminal can withstand a current of 10A, so that this product can have a good effect even when the current is unstable. 【Wide Application】Products can be used in homes, farms, factories, offices, laboratories, supermarkets, etc. You can remotely use each device connected to the receiver relay via the remote control. Such as: truck trunk, garage door, electric door, shutter door, extension door and electric curtain, fan, lamp, lighting, ventilation device, signal transmission and so on.