PowMr 60a Charge Controller - Solar Panel Charge Controller 12V 24V, Max 48V 1560W Input Adjustable Parameter LCD Display Current / Capacity and Timer Setting ON/Off with 5V Dual USB
En stock
6.18 kg
Sí
Nuevo
Amazon
USA
- NOTE :Please Make sure your battery has enough voltage before first installation.(at least 60%) System Voltage: 12V 24V Auto Charge current: 60A Max input power: 780W(12V system); 1560W(24V system) USB output: Dual USB output, 5V/2.5A Max input voltage: 24V(12V system); 48V(24V system) Batteries: Only fit for OPEN, AGM, GEL Float charge: 13.7V(defaul, adjustable) Discharge reconnect voltage: 12.6V(defaul, adjustable) Float charge: 13.7V(defaul, adjustable) Discharge reconnect voltage: 12.6V(defaul, adjustable) Discharge stop voltage: 10.7(defaul, adjustable) Turn ON/OFF light voltage: Solar pannel 8V. Temperature: -35℃~+60℃ Self-consume: <10mA Size/Weight: 193mm*51mm*98mm/390g Load mode: 1. 【0H】Light control mode. [controller recognize voltage auto, if solar panel's voltage under 8V, Load will turn on] 2. 【1-15H】Light controller+ Set an specific time to turn off your load. 3. 【24H】 Load always turn on. [except your battery's voltage is too low to read] MENU:1. Press to browse parameters. 2.Press and hold about 3 seconds to enter detail setting UP: Press to increase value DOWN: Press to decrease value TIPS OF INSTALLTION: (ALWAYS CONNECT BATTERY FIRST!!) Step 1, Screw the adjustment screw counter clockwise until the plates moves down. Step 2, Please peel off the coating of the cable tip by about 8 to 10 mm, then insert the wire into the new opening between the plate and the "top" of the Terminal hole, not under it. Step 3, Screw the adjuster clockwise and the plate will move upwards thereby squishing the wire in the Terminal hole, Make sure all connections are tight.
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conoce más detalles
🙌 This 60a charge controller compatibility with 12V and 24V system. Fully 4-Stage PWM charge (Boost, ABS, Equalization,Float), 12V(780W) / 24V(1560W) input, Dual USB can give your electronic product max 5V 2A. 🙌 Backlight LCD display PV/ Battery/ Load charge and discharge parameter. Adjustable Floating voltage/ LVD/ LVR/ Load Timer according needs for this charge controller. ADD Feature: Charge and Discharge Current, Charge and Discharge energy recording function. 🙌 This solar charge controller fit for Lead-acid batteries (OPEN,AGM,GEL) with mutiple load timer. Load should be DC. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically. 🙌 PWM charge controller Protection - Dual MOSFET Reverse current/ over heat /Under-voltage discharge discharge / short-circuit / open-circuit / over-load/ over-charging protection. More safe using for home, industrial, commercial etc.