U$S $
0

Recibí aproximadamente entre 10 y 15 días hábiles

Pasa el mouse para ver la imagen ampliada

Drok

DROK®0.28''High Accuracy DC 0-33.00V/0-999.9mA-3.000A 12V Voltmeter Ammeter Voltage Current Tester Monitor Panel Gauge with Red&Blue Dual LED Digital Display for Vehicle Automotive Solar Battery

138 Calificaciones

Disponibilidad: Fuera de stock

Marca: Drok

Peso con empaque: 0.355 kg

Producto sin devolución

Producto de: Amazon

Measuring Voltage: 0.00-33.00V; Measuring Current: DC 0-999.9mA-3.000A(change the resolution automatically)
This Volt/Amp meter is 0.28'' 4 digit high accuracy dual display, the display is bright and sharp.
When measuring current, the measured line provides power supply. Don't need a isolated power supply.
High accuracy voltage measurement with measuring line voltage drop compensation.
A good tool to monitor charging LI-ion batteries and electronics bench, etc.

Ver más

SKU: B00IZTTAKO

Ver Calificaciones

Este producto viaja > USA > Tus Manos

Más detalles del producto

Technical Parameters: Display color: Red+Blue Display mode: Dual 0.28" LED digital 4 bit tube Refresh rate: About 200 ms/time Dimensions: 48 x 29 x 21 mm (L*W* H) Cutting size: 45 x 26 mm (L*W) Supply voltage: DC 3.5-28V Lead wire length: 14 cm (5-wires) Measurement range: DC 0-999.9mA-3.000A(current); 0.00-33.00V(voltage) Operation temperature: -10 degrees~65 degrees Measurement accuracy: ± (0.3% + 2 digits) Net weight : 22g Display Description: Voltage measurement range: 0.00-33.00V; the minimum resolution is 10mV. Current measurement range: 0-999.9mA-3.000A. when the measuring current is below 1A, it display ***.*mA, the resolution is 0.1mA; when the measuring current is higher than 1A, it display *.***A, the resolution is 1mA. Wiring Instruction: RED(VCC): Power input+, 3.5-28V (NOTE: If the measuring signal is lower than 28V and have abundant power supply, it can be used as power supply for the meter. black wire and yellow wire are contacted together to use) Black(GND): Power input- , Measurement signal- (3.5-28V) Yellow(VIN): Measurement signal+ (0-33.00V) RED(I+): Current input+ (must be connected in series between Power Supply Negative and Load Negative) Black(I-): Current input- (must connected in series between Power Supply Negative and Load Negative) Package Includes: 1x 0-33.00V/0-3.000A Volt Amp Meter

Más información para tu compra de DROK®0.28''High Accuracy D...

abrir

¿Cuál es la valoración promedio de DROK®0.28''High Accuracy D...?

La valoración promedio de DROK®0.28''High Accuracy D... es 4 (basado en 138 reviews).

abrir

¿A qué tienda pertenece este producto?

DROK®0.28''High Accuracy D... pertenece al catálogo de Amazon

abrir

¿Cuánto demora el envío de DROK®0.28''High Accuracy D...?

Los tiempos de envió pueden variar según el producto. Recibí DROK®0.28''High Accuracy D... en tu casa en un tiempo de más de 26 dias.

abrir

¿Este producto tiene garantía de entrega?

Todas las órdenes tienen garantía de entrega en Uruguay. Si tu pedido no llegó luego de 60 días de realizada la orden, te devolvemos el total de tu dinero. Tener en cuenta que si la orden queda retenida en aduana por razones ajenas a Tiendamia (ejemplo: exceso de franquicias) no aplica esta garantía.

 
 
  Loading...