Artículo: AMZ-B0FQJ84SYD

CQRobot

CQRobot 2 Pack 4 Ohm 3 Watt Mini Speaker 28 * 31mm with 15cm for Dupont 2.54mm Connector Cable Compatible with Arduino, for Small Electronics Projects.

Detalles del producto

Disponibilidad
En stock

Peso con empaque
0.20 kg

Devolución
Sí

Condición
Nuevo

Producto de
Amazon

Viaja desde
USA

Sobre este producto

CQRobot designed this small passive speaker specifically for makers and electronics enthusiasts. It uses a for DuPont 2.54mm standard interface, has a 4-ohm impedance, and a rated power of 3 watts. It delivers clear, rich sound with excellent fidelity and effectively suppresses distortion, making it suitable for building various audio systems and easily integrated into a variety of audio projects.SpecificationsDimensions: 28mm * 31mm * 15mm Impedance: 4 ohms ±15% @1.0kHz Rated Input Power: 3W Maximum Input Power: 5W Sensitivity: 89 ±3dB (at 0.1W/0.1m, averaged at 0.8, 1.0, 1.2, and 1.5kHz) Frequency Range: 200-3000Hz Distortion: Maximum 5% at rated input voltage of 0.89V (1.0kHz/rated power) Lowest Resonant Frequency (F0): 500Hz ±15% Operating Temperature: -20°C to +50°C Storage Temperature: -25°C to +60°C Polarity: When positive DC current is applied to the + or mark on the terminals, the diaphragm should move forward. Connector: for DuPont 2.54mm Connector cable length: 15 cm Magnet material: NdFeB Voice coil material: CopperShipping List2 * Passive speakers 28*31mm, 3 watts, 4 ohms (for DuPont 2.54 connector)

$26,16

49% OFF

$13,42

$26,16

49% OFF

$13,42

Envío gratis

Llega en 12 a 16 días hábiles

Tienes garantia de entrega

Medios de pago

Cantidad

Este producto viaja de USA

a tus manos en

Medios de pago

Conoce más detalles

Pre-installed with a for DuPont2.54 connector cable, it easily connects to compatible motherboards without soldering, greatly simplifying DIY assembly or repair Rated at 3W and 4 ohm impedance, it features an internal magnetic design and a non-paper diaphragm, ensuring clear and stable sound, making it ideal for 3.3V/5V low-voltage circuits Measuring a standard 28*31*15mm (1.1*1.2*0.59-inch) size, the full-range cavity design and compact rectangular form factor make it easy to install in various electronic devices and prototyping projects Perfectly compatible with Arduino, Raspberry Pi and other development boards, it's an ideal replacement for speakers in electronic toys, robots, game consoles, and advertising projects Includes two high-quality speakers, packaged in a custom protective box for safe shipping. A two-pack provides backup options or allows for multiple projects simultaneously, making it a practical choice for electronics enthusiasts and repair technicians

CQRobot 2 Pack 4 Ohm 3 Watt Mini Speaker 28 * 31mm with 15cm for Dupont 2.54mm Connector Cable Compatible with Arduino, for Small Electronics Projects.

Conoce más detalles

CQRobot Miniature Loudspeaker 5 Watt 8 Ohm Passive Enclosed Audio/Woofer Speaker Compatible with Arduino Board. 2.54mm Dupont Interface, for a Variety of Small DIY Electronic Projects.

CQRobot Miniature Loudspeaker 5 Watt 8 Ohm Passive Enclosed Audio/Woofer Speaker Compatible with Arduino Board. JST-PH 2.0 mm 2-Pin Interface, for a Variety of Small DIY Electronic Projects.

CQRobot Miniature Loudspeaker 3 Watt 4 Ohm Passive Enclosed Audio/Woofer Speaker Compatible with Arduino Board. 2.54mm Dupont Interface, for a Variety of Small DIY Electronic Projects.

CQRobot 2 Pieces / 1 Pair 35mm * 25mm * 6.8mm Side Sound 8 Ohm 2 Watt/3 Watt Rectangle Cavity Speaker, JST-PH 2.0 mm 2-Pin Interface Wire, for Computer Electronic Project Application Components.

CQRobot 2 Pieces/1 Pair 35 mm * 25 mm * 6.8 mm Side Sound 8 Ohm 2 Watt / 3 Watt Rectangle Cavity Speaker, JST 1.25 mm 2-Pin Interface Wire, for Computer Electronic Project Application Components.

CQRobot 2 Pieces/1 Pair 35 mm * 25 mm * 6.8 mm Side Sound 4 Ohm 2 Watt / 3 Watt Rectangle Cavity Speaker, JST 1.25 mm 2-Pin Interface Wire, for Computer Electronic Project Application Components.

CQRobot 2 Pieces/1 Pair 35 mm * 25 mm * 6.8 mm Side Sound 4 Ohm 2 Watt / 3 Watt Rectangle Cavity Speaker, JST-PH 2.0 mm 2-Pin Interface Wire, for Computer Electronic Project Application Components.

CQRobot 2 Pieces / 1 Pair 35 mm * 25 mm * 6.8 mm Side Sound 8 Ohm 2 Watt/3 Watt Rectangle Cavity Speaker, for Dupont 2.54 mm Interface Wire, for Computer Electronic Project Application Components.

CQRobot 2 Pieces / 1 Pair 35 mm * 25 mm * 6.8 mm Side Sound 4 Ohm 2 Watt/3 Watt Rectangle Cavity Speaker, JST 1.25 mm 2-Pin Interface Wire, for Computer Electronic Project Application Components.

CQRobot 270:1 Metal DC Geared-Down Motor 37Dx72.5L mm 6V/12V, with 64 CPR Encoder and Bracket. 6V-3W-20RPM-40 kg.cm(556 oz.in), 12V-6W-40RPM-70 kg.cm(972 oz.in), D-Shaped Output Shaft 16mm.

CQRobot Speaker 3 Watt 8 Ohm Compatible with Arduino Motherboard, JST-PH2.0 Interface. It is Ideal for a Variety of Small Electronic Projects.

CQRobot Speaker 3 Watt 4 Ohm Compatible with Arduino Motherboard, JST-PH2.0 Interface. It is Ideal for a Variety of Small Electronic Projects.

CQRobot Non-Contact Water/Liquid Level Sensor Compatible with Arduino, Raspberry Pi and Other Motherboards. for Industrial Production, Aquarium, Chemical Solution, Agriculture, Gardening, etc.

CQRobot 90:1 Metal DC Geared-Down Motor 37Dx70L mm 6V/12V, with 64 CPR Encoder and Bracket. 6V-5W-60RPM-18 kg.cm(250 oz.in), 12V-10W-120RPM-32 kg.cm(444 oz.in), D-Shaped Output Shaft 16mm.

CQRobot MCP23017 IO Expansion Board Compatible with Raspberry Pi/Micro:bit/Arduino/STM32. I2C Interface Control, 2 Signal Pins Increase to 16 Input/Output Pins, Supports UP to 8 Simultaneous Uses.

CQRobot 70:1 Metal DC Geared-Down Motor 37Dx54.8L mm 6V or 12V with Mounting Bracket Kit. 6V-5W-75RPM-15 kg.cm(208 oz.in), 12V-10W-150RPM-27 kg.cm(375 oz.in), D-Shaped Output Shaft Long 16mm.

CQRobot DMX Shield MAX485 Chipset Compatible with Arduino Motherboard (RDM Capable), with XLR 3-Pin Male/Female Connectors, Device into DMX512 Network, LED/Music Remote Device Management Capable.

CQRobot VL53L1X Time-of-Flight (ToF) Long Distance Ranging Sensor, Compatible with Raspberry Pi/Arduino/STM32 Board, I2C Interface. for Mobile Robot, UAV, Detection Mode, Camera, Smart Home.

CQRobot Miniature Loudspeaker 3 Watt 4 Ohm Passive Enclosed Audio/Woofer Speaker Compatible with Arduino Board. 2.54mm Dupont Interface, for a Variety of Small DIY Electronic Projects.

CQRobot 5.8GHz Doppler Effect Microwave Motion Sensor Compatible with Arduino and Raspberry Pi Motherboard. for Industry, Transportation, Agriculture, Smart Home, Security Monitoring, etc.

CQRobot JST XH 2.54 mm Pitch 5-Pin Electronic Computer Connector IC Male Plugs, Female Sockets Housing and T-Shaped Crimp Terminal Kit. 50 Sets/350 Pieces Wire-to-Board Adapter Cable Assembly.

Información útil

Centro de ayuda

Todo en un solo lugar

Comprá con tranquilidad

CQRobot 2 Pack 4 Ohm 3 Watt Mini Speaker 28 * 31mm with 15cm for Dupont 2.54mm Connector Cable Compatible with Arduino, for Small Electronics Projects.

Conoce más detalles

Productos Relacionados

CQRobot Miniature Loudspeaker 5 Watt 8 Ohm Passive Enclosed Audio/Woofer Speaker Compatible with Arduino Board. 2.54mm Dupont Interface, for a Variety of Small DIY Electronic Projects.

CQRobot Miniature Loudspeaker 5 Watt 8 Ohm Passive Enclosed Audio/Woofer Speaker Compatible with Arduino Board. JST-PH 2.0 mm 2-Pin Interface, for a Variety of Small DIY Electronic Projects.

CQRobot Miniature Loudspeaker 3 Watt 4 Ohm Passive Enclosed Audio/Woofer Speaker Compatible with Arduino Board. 2.54mm Dupont Interface, for a Variety of Small DIY Electronic Projects.

CQRobot 2 Pieces / 1 Pair 35mm * 25mm * 6.8mm Side Sound 8 Ohm 2 Watt/3 Watt Rectangle Cavity Speaker, JST-PH 2.0 mm 2-Pin Interface Wire, for Computer Electronic Project Application Components.

CQRobot 2 Pieces/1 Pair 35 mm * 25 mm * 6.8 mm Side Sound 8 Ohm 2 Watt / 3 Watt Rectangle Cavity Speaker, JST 1.25 mm 2-Pin Interface Wire, for Computer Electronic Project Application Components.

CQRobot 2 Pieces/1 Pair 35 mm * 25 mm * 6.8 mm Side Sound 4 Ohm 2 Watt / 3 Watt Rectangle Cavity Speaker, JST 1.25 mm 2-Pin Interface Wire, for Computer Electronic Project Application Components.

CQRobot 2 Pieces/1 Pair 35 mm * 25 mm * 6.8 mm Side Sound 4 Ohm 2 Watt / 3 Watt Rectangle Cavity Speaker, JST-PH 2.0 mm 2-Pin Interface Wire, for Computer Electronic Project Application Components.

CQRobot 2 Pieces / 1 Pair 35 mm * 25 mm * 6.8 mm Side Sound 8 Ohm 2 Watt/3 Watt Rectangle Cavity Speaker, for Dupont 2.54 mm Interface Wire, for Computer Electronic Project Application Components.

CQRobot 2 Pieces / 1 Pair 35 mm * 25 mm * 6.8 mm Side Sound 4 Ohm 2 Watt/3 Watt Rectangle Cavity Speaker, JST 1.25 mm 2-Pin Interface Wire, for Computer Electronic Project Application Components.

Otros Productos

CQRobot 270:1 Metal DC Geared-Down Motor 37Dx72.5L mm 6V/12V, with 64 CPR Encoder and Bracket. 6V-3W-20RPM-40 kg.cm(556 oz.in), 12V-6W-40RPM-70 kg.cm(972 oz.in), D-Shaped Output Shaft 16mm.

CQRobot Speaker 3 Watt 8 Ohm Compatible with Arduino Motherboard, JST-PH2.0 Interface. It is Ideal for a Variety of Small Electronic Projects.

CQRobot Speaker 3 Watt 4 Ohm Compatible with Arduino Motherboard, JST-PH2.0 Interface. It is Ideal for a Variety of Small Electronic Projects.

CQRobot Non-Contact Water/Liquid Level Sensor Compatible with Arduino, Raspberry Pi and Other Motherboards. for Industrial Production, Aquarium, Chemical Solution, Agriculture, Gardening, etc.

CQRobot 90:1 Metal DC Geared-Down Motor 37Dx70L mm 6V/12V, with 64 CPR Encoder and Bracket. 6V-5W-60RPM-18 kg.cm(250 oz.in), 12V-10W-120RPM-32 kg.cm(444 oz.in), D-Shaped Output Shaft 16mm.

CQRobot MCP23017 IO Expansion Board Compatible with Raspberry Pi/Micro:bit/Arduino/STM32. I2C Interface Control, 2 Signal Pins Increase to 16 Input/Output Pins, Supports UP to 8 Simultaneous Uses.

CQRobot 70:1 Metal DC Geared-Down Motor 37Dx54.8L mm 6V or 12V with Mounting Bracket Kit. 6V-5W-75RPM-15 kg.cm(208 oz.in), 12V-10W-150RPM-27 kg.cm(375 oz.in), D-Shaped Output Shaft Long 16mm.

CQRobot DMX Shield MAX485 Chipset Compatible with Arduino Motherboard (RDM Capable), with XLR 3-Pin Male/Female Connectors, Device into DMX512 Network, LED/Music Remote Device Management Capable.

CQRobot VL53L1X Time-of-Flight (ToF) Long Distance Ranging Sensor, Compatible with Raspberry Pi/Arduino/STM32 Board, I2C Interface. for Mobile Robot, UAV, Detection Mode, Camera, Smart Home.

CQRobot Miniature Loudspeaker 3 Watt 4 Ohm Passive Enclosed Audio/Woofer Speaker Compatible with Arduino Board. 2.54mm Dupont Interface, for a Variety of Small DIY Electronic Projects.

CQRobot 5.8GHz Doppler Effect Microwave Motion Sensor Compatible with Arduino and Raspberry Pi Motherboard. for Industry, Transportation, Agriculture, Smart Home, Security Monitoring, etc.

CQRobot JST XH 2.54 mm Pitch 5-Pin Electronic Computer Connector IC Male Plugs, Female Sockets Housing and T-Shaped Crimp Terminal Kit. 50 Sets/350 Pieces Wire-to-Board Adapter Cable Assembly.

Compra protegida

¿Cómo comprar?

Información de Aduanas Ecuador

Garantía de entrega

¿Cómo solicitar una devolución?

Los productos sin devolución son:

Tarjetas de Débito y Crédito

Pagos a través de PayPal

¿Cómo comprar?

Hacemos todo por ti

Tarjetas de Débito, Crédito y Deuna

Pagos a través de Deuna

Pagos a través de PayPal

Garantía de entrega

Compra como si vivieras fuera, pero desde cualquier lugar de Ecuador