hiBCTR 1.3" I2C IIC SSH1106/SSD1306 OLED Display Module - 128x64 Resolution Compatible with Arduino/STM32/AVR/PIC, Ultra-Low Power 0.08W
En stock
0.20 kg
Sí
Nuevo
Amazon
USA
- Product Description Crisp Visual Performance Self-illuminating OLED technology delivers deep blacks and high contrast (100,000:1) without backlighting, readable in sunlight or darkness. Technical Specifications Display Size: 1.3-inch diagonal Resolution: 128 × 64 pixels Driver IC: SSH1106 (SSD1306 compatible) Interface: I2C (400kHz max) Power Consumption: 0.08W (full white screen) Viewing Angle: 160° horizontal/vertical Operating Voltage: 3.3V–5V DC I2C Address Flexibility Change default address (0x3C) via resistor modification to avoid conflicts in multi-display setups. Universal Compatibility Microcontrollers: Compatible with Arduino Uno, STM32 Blue Pill, ATmega328P, PIC16F877A Libraries:Compatible with Arduino_SSD1306, U8g2, Tiny4kOLED Logic Levels: 3.3V/5V tolerant I/O pins Hardware Integration Mounting: 4x 2mm corner holes (35.5mm × 35.5mm PCB) Connector: 4-pin header (VCC, GND, SCL, SDA) Dimensions: 38mm × 38mm × 7mm Applications IoT device status dashboards Sensor data monitors (temperature/humidity) Robotics control interfaces Portable instrumentation displays Package Includes 1 × 1.3" OLED display module Usage Notes I2C Pull-Up Resistors: Add 4.7kΩ resistors if not on controller board. Power Stability: Use decoupling capacitor (10μF) near VCC/GND. Code Setup: Initialize with 128x64 resolution in library.
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conoce más detalles
High-Resolution Display: 1.3-inch OLED with 128x64 pixels, SSH1106/SSD1306 driver IC for sharp contrast and wide viewing angles. Ultra-Low Power Consumption: Full-screen operation at 0.08W (20mA @ 5V), ideal for battery-powered projects. Flexible I2C Interface: Configurable I2C address (default 0x3C) supports multiple displays on one bus. Broad Compatibility: Compatible with Arduino, STM32, AVR, PIC, MSP430, and CSR ICs via standard libraries. Easy Installation: 4x mounting holes for secure PCB/panel integration; pre-soldered 4-pin header (VCC/GND/SCL/SDA).