YELUFT 1pcs Pre-Soldered 1.3 Inch I2C IIC OLED Display Module 128 x 64 Pixel SSD1106 Self-Luminous Display Board for Arduino/Raspberry Pi/ESP32
Size:
1
En stock
0.20 kg
Sí
Nuevo
Amazon
USA
- 1.3-inch I2C IIC OLED display module is a mini display screen with 128 x 64 resolution and SH1106 chipset Standard IIC communication interface pinout and these modules can be controlled by I2C, compatible with most platform such as Arduino, Raspberry Pi, ESP, etc Features: Easy to setup Super low power consumption Support I2C IIC communication Protocol Good compatibility: for Arduino, ESP32, C51, MSP430 series, STM32, Raspberry Pi 5/4B/3B+/3B/2B/Zero and so on Parameters: Driver Chip: SH1106 Resolution: 128 x 64 Colour: White Viewing Angle: Greater than 160 degree Power Consumption: 0.06W Wide Voltage Support: 3.3V or 5V DC Working Temperature: -20 degree Celsius - 60 degree Celsius Communication Mode: IIC, only 2 I/O interfaces are required OLED self-luminous, no backlight required Use mould taking software to take characters Pin Definition: GND: Ground VCC: 3.3V-5V SCL: Serial Clock SDA: Serial Data Size: Screen Size: 1.3 inch Effective Display Area (AA area): 29.42x14.7mm PCB Backplane Size: 33.50x35.40mm Package Content: 1 * 1.3-inch IIC I2C OLED Display Module 1 * Protective Case
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conoce más detalles
128 x 64 Pixel: Needn't backlight, these OLED module can self-luminous. It has super high contrast, bright and crisp dots, viewing angle is greater than 160 degree, even tiny fonts quite readable No Embedded Fonts: There are no embedded fonts inside these Arduino display module, you can create the fonts through font generation software Changeable IIC Address: Solder the resistor to the 0x7B side on the back and disconnect the 0x7A side, then the 0x7B slave device address will be selected (default); Solder the resistor on the 0x7A side and disconnect the 0x7B side, then the 0x7A slave device address will be selected; when switches the IIC slave address of the hardware, the software should be modified accordingly Application: These OLED display can be used for Arduino, Raspberry Pi 5/4B/3B+/3B/2B/Zero, STM32, C51, MSP430, ESP32 development board and so on. Showing graphical & textual information directly of your machines Parameters: Screen Size: 1.3-inch; Driver Chip: SSD1106; Resolution: 128*64; Color: White; Viewing Angle: greater than 160 degree; Power Consumption: 0.06W; Voltage: 3.3V or 5V DC; Working Temperature: -20 degree Celsius - 60 degree Celsius