Waveshare ESP32-S3 1.8inch AMOLED Touch Display, Embedded with SH8601 Display Driver and FT3168 Capacitive Touch Chip, ESP32 with Display,32-bit LX7 Dual-core, 368×448 Pixels, Without Lithium Battery
En stock
0.20 kg
Sí
Nuevo
Amazon
USA
- ESP32-S3-Touch-AMOLED-1.8 is a low-cost, high-performance MCU board designed by Waveshare, tiny size, with onboard 1.8inch AMOLED display, power management IC, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC, low power audio codec, and so on, which makes it easy for you to develop and integrate it into the products quickly.
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conoce más detalles
Note!!!This product requires a lithium battery for use. This version does not come with the lithium battery and needs to be purchased separately. Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory Type-C connector, improving device compatibility, easier to use. Onboard 1.8inch AMOLED display for clear color picture display, 368 × 448 resolution, 16.7M color. Built-in SH8601 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources Onboard 1.8inch AMOLED display for clear color picture display, 368 × 448 resolution, 16.7M color. Built-in SH8601 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc.. Onboard PCF85063 RTC chip, powered by main Lithium battery through AXP2101 chip, with reserved RTC battery pads for connecting a backup battery, ensuring RTC function during the replacement of the main battery. Onboard PWR and BOOT programmable buttons for easy custom function development Onboard 3.7V MX1.25 Lithium battery recharge/discharge header, optional for 3.7V Lithium battery. Reserved pads of 7 × GPIO, 1 × I2C, 1 × UART, and 1 × USB interface, for connecting peripherals and debugging. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, battery charging, battery management, and battery life optimization, etc. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.