Garantía de entrega
Artículo: AMZ-B0CW276WGS
Treedix
Treedix Breadboard Power Supply Module 3.3V 200mA 5V 2A Prototype Breadboard Equiped with USB Type-C Charging Port, Type-A Output Port and Rechargeable Battery's Stand, Charging Module for Arduino
Detalles del producto
Disponibilidad
En stock
En stock
Peso con empaque
0.20 kg
0.20 kg
Devolución
Sí
Sí
Condición
Nuevo
Nuevo
Producto de
Amazon
Amazon
Viaja desde
USA
USA
Sobre este producto
- Specification: Output Voltage: 3.3V/5V Size of the Breakout Board: 75 x 35 mm（2.95*1.37in） Maximum Output Current: 2.4A (we suggest to use it under 2A) Two Modes of Supplying Power: Insert the rechargeable battery or use usb type-c Intelligent Identification Load: After inserting the battery into the module, insert the module into the breadboard and press the switch knob. If the experiment is done on the breadboard, the module will start to supply power. When the experiment is stopped on the breadboard, long press the switch for 10 seconds to stop the power supply and enter the standby state. Standby power consumption less than 100μA. When no device is connected, the led light automatically turns off in 40 seconds Note 1.There are marks of negative/positive anodes in the module, and they can not be inserted inversely into the breadboard or the chips of the module will be burn. 2.This module has protection of overcurrent, overvoltage, and short-circuit for output or input; and module over temperature protection, instantaneous withstand voltage 12V. 3. It is not recommended that input and output work at the same time, because the voltage is less than 5V 4. Note: This product does not have a charging protocol and cannot power devices with a communication protocol 5. It is not recommended to charge the battery below 3000 mah, unless it is with a protection board, otherwise the current is too large to damage the battery. 6.Pay attention to the correct installation of the battery. The reverse installation may cause damage
$24,94
44% OFF
$13,86
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
$24,94
44% OFF
$13,86
3 meses de gracia en diferidos y hasta 6 meses sin intereses con Pacificard
Envío gratis
Llega en 5 a 12 días hábiles
Con envío
Tienes garantia de entrega
Este producto viaja
de USA ![]()
a tus manos en
![]()
a tus manos en
Conoce más detalles
Breadboard Power Module: the module is designed for the convenience of experiments on the breadboard, onboard 3.3V, 5V DC output pin charging mode. Improved Charging Modes: You can use USB-C to directly charge the module and power the breadboard, or insert the rechargeable batteries into the battery slot of the module. Power Display: there are four led lights to show the remaining power, which is convenient for you to check the power and ensure the normal progress of the experiment Maximum Output current: 2.4A, but considering the module heating problems and life problems, we very recommend you to use under 2A. The output voltage is 3.3V or 5V. Application: the power module is widely used in MCU, electronic building blocks, intelligent cars and other power supply extensions. It comes with USB Type-A interface for the power output of external devices, and can also be used as a mobile power supply for other devices.
Compra protegida
Disfruta de una experiencia de compra segura y confiable
![]()
Garantía de entrega
Con Tiendamia todas tus compras cuentan con Garantía de Entrega o devolución total de tu dinero.
Compras 100% seguras y garantizadas, para que pidas lo que sueñas y lo recibas del mundo a tu puerta.
Tarjetas de Débito y Crédito
Visa
Mastercard
American Express
Dinners
Discover
Alias
Pagos a través de PayPal
Compra procesada en dólares con dinero en cuenta o tarjetas internacionales.
PayPal
.svg)
