UHPPOTE Door Access Control Power Supply 12V for Electric Lock Intercom Camera (Input 110VAC to Output 12VDC 3A)
En stock
2.34 kg
No
Nuevo
Amazon
USA
- Introduction: HBK-P02 power supply by HOBK is dedicated to access control system, which is suitable for all kinds of access keypads and building intercom equipments, especially for all types of electric locks. It can control electric locks via the signal wire or other switch signal output of the access keypad, which reduce the loads of the access keypad so as to reduce the hidden dangers. With working voltage of 3A, it can provide electric lock and access controller with 12VDC steady output voltage. Features: Indoor use only. Low noise design with ripple as low as 85mVp-p. Compatible with electric lock, access controller, exit push button and intercom camera. Can reduce the load of access controller and saving wiring to reduce the hidden dangers. Time delay can be adjusted from 0 to 15 seconds. With backup battery link, can support to add external battery. Battery reverse protection: When the battery is connected reversely, the power supply will not be damaged. At this point, adjust the cathode and anode of the battery, and the power supply will recover in about 20 seconds. With lightning strike protection function. Specifications: Input Voltage: 110VAC/60Hz Output Voltage: 12VDC Output Current: 3A Time Delay: 0-15s Enclosure Material: SPCC Finish: Spraying Operating Humidity: 10%-90%RH Operating Temperature: -4℉ to +140℉ (-20℃ to +60℃) Product Weight: 3.97lb Dimensions: 7-33/64”x4-11/32”x2-15/16” [191x110.3x74.5mm] Backup Battery Type: 12V storage battery. Recommend 12V 7AH battery. Package List: 1 x Power Supply 1 x Power Cord 1 x User Manual 1 x Installation Drawing 1 x Accessories Package
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conoce más detalles
✅ HBK-P02 power supply by HOBK is dedicated to access control system, which is suitable for all kinds of access keypads and building intercom equipments, especially for all types of electric locks. It can control electric locks via the signal wire or other switch signal output of the access keypad, which reduce the loads of the access keypad so as to reduce the hidden dangers. ✅ With working voltage of 3A, it can provide electric lock and access controller with 12VDC steady output voltage. ✅ Compatible with electric lock, access controller, exit push button and intercom camera. ✅ Time delay can be adjusted from 0 to 15 seconds. ✅ With backup battery link, can support to add external battery.