Garantía de entrega
Artículo: AMZ-B0CLCRF1QS
AITIAO
AITIAO 2PCS BME280 3.3V Sensor Module Pre-Soldered High Precision Atmospheric Pressure Sensor GY-BME280-3.3 Temperature Humidity Sensor Module for Raspberry Pi and Other MicroControllers
Detalles del producto
Disponibilidad
En stock
En stock
Peso con empaque
0.20 kg
0.20 kg
Devolución
Sí
Sí
Condición
Nuevo
Nuevo
Producto de
Amazon
Amazon
Viaja desde
USA
USA
Sobre este producto
- Description:BME280 is a Temperature, Humidity & Pressure Sensor breakout board.The board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm.Default setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd & Vdd_IO.If you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!Even better, this product is ready to be plugged in since it already has soldered pins. Saving time and avoiding danger. Specifications:Interface: I2C and SPISupply Voltage: 3.3VMeasurements: Temperature, Pressure, Humidity. Pressure can be converted to altitude.Compatibility: All Raspberry Pi and any microcontroller with I2C or SPI capabilities.Soldering: Comes Pre-Soldered.Temperature Range: -40 - 85 °CPressure Range: 300 - 1100 hPaHumidity Range: 0 - 100 %Humidity Response Time: 1 sCurrent Consumption:~3.6 μAPins:VCC: This pin is used for Supply Voltage.GND: This pin is used for ground.SCL: This pin is used for the clock pulse for I2C communication.SDA: This pin is used for transferring data through I2C communication.CSB: This pin can be used to allow multiple devices to share the same I2C bus.SDO: This pin can be used to select the device's I2C address when multiple BME280 sensors are connected to the same I2C bus.Package Included: 2pcs BME280 3.3V Atmospheric Pressure Sensor Module
$30,61
44% OFF
$17,00
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
$30,61
44% OFF
$17,00
3 meses de gracia en diferidos y hasta 6 meses sin intereses con Pacificard
Envío gratis
Llega en 5 a 12 días hábiles
Con envío
Tienes garantia de entrega
Este producto viaja
de USA ![]()
a tus manos en
![]()
a tus manos en
Conoce más detalles
The BME280 is the next-generation of sensors, and is the upgrade to the BMP085/BMP180/BMP183 - with a low altitude noise of 0.25m and the same fast conversion time. It has the same specifications, but can use either I2C or SPI. Pre-soldered BME280 Sensor Module: Solderless! Pins already attached. Ready to plug in and go. BME280, the precision sensor from , is soldered onto PCB. Not only the pressure and the temperature, this sensor can measure humidity. It uses both I2C and SPI (supports 3-, 4-wire SPI) interface Supply voltage VDD main supply voltage range: 1.71 V to 3.6 V; Pressure: 300-1100 hPa; Temperature: -40 to +85°C ; Humidity: 0-100%; Interface: I2C (up to 3.4MHz), SPI (up to 10 MHz) BME280 3.3V Sensor Module: High resolution and low noise, with quick response times, can be used for altitude measurements, weather monitoring, or even gaming!
Compra protegida
Disfruta de una experiencia de compra segura y confiable
![]()
Garantía de entrega
Con Tiendamia todas tus compras cuentan con Garantía de Entrega o devolución total de tu dinero.
Compras 100% seguras y garantizadas, para que pidas lo que sueñas y lo recibas del mundo a tu puerta.
Tarjetas de Débito y Crédito
Visa
Mastercard
American Express
Dinners
Discover
Alias
Pagos a través de PayPal
Compra procesada en dólares con dinero en cuenta o tarjetas internacionales.
PayPal
.svg)
