Artículo: AMZ-B0CD2G3F76

DKARDU

DKARDU 6 pcs TMC2209 V1.3 Stepper Motor Driver Module 2.8A Peak Driver with Heat Sink Screwdriver for SKR 3/SKR 2/Octopus V1.1/SKR V1.4 Turbo/SKR V1.3 3D Printer Motherboards

Detalles del producto
Disponibilidad
Sin stock
Peso con empaque
0.20 kg
Devolución
No
Condición
Nuevo
Producto de
Amazon
Viaja desde
USA

Sobre este producto
  • TMC2209 is an ultra-silent motor driver IC for two-phase stepper motors.Its continuous drive current is 2A and peak current is 2.8A.Compared with TMC2208, the driving current of this IC is not only improved by 0.6A-0.8A,but also this IC increases the function of locked-motor test. This IC Have Some Patent Technologies: SpreadCycle (highly dynamic motor control chopper) StealthChop2 (ultra-quiet technology) MicroPlyer (microstep control) StallGuard4 (locked-motor test) CoolStep (current dynamic control) Advantage: 1.The motor is difficult to lose steps 2.Ultra-quiet mode 3.The module has a large-area cooling pad,it can lower the temperature when drive is working 4.The module can prevent the motor from shaking 5.The module support locked-motor test 6.The module support STEP/DIR and UART mode Matters Needing Attentions: Before installing the drive, make sure disconnect the power supply to prevent the drive from burning out. Before installing the drive, user must confirm the drive direction, to prevent back connection caused by the drive burning. Do not plug and unplug the drive module when the device is working in order to avoid damage. When user install the heat sink, make sure the heat sink is not connected to the pin.We need prevent driving short circuit. Pay attention to the wiring sequence and I/O port when wiring.If the wrong line is connected, the driver will not work directly. Package Includes: 6 x TMC2209 V1.3 Stepper Motor Driver module 6 x Heat Sink 1 X Screwdriver

Producto prohibido

Este producto no está disponible

Este producto viaja de USA a tus manos en

Conoce más detalles

What it does: TMC2209 is an ultra-silent motor driver IC for two-phase stepper motors.Its continuous drive current is 2A and peak current is 2.8A.Compared with TMC2208, the driving current of this IC is not only improved by 0.6A-0.8A,but also this IC increases the function of locked-motor test. Excellent Compatibility: It is compatible with popular 3D printer motherboards, such as BTT SKR 2, SKR 3, SKR 3 EZ, OctopusV1.1, SKR V1.4 Turbo, GEN L V2.0, Anycubic I3 Mega motherboards. Better thermal performance: The TMC2209 V1.3 stepper motor driver generates lower heat, which can reduce 30% heat than other stepper motor drivers even if it works for a long time.And it has larger cooling area to lower the temperature. 256 Microsteps: The Flexible microPlyer interpolation unit can provide 256 microsteps.Stallguard4locked-motor test can provide an abnormal signal when the motor rotates abnormally.CoolStep current dynamic control can save 75% energy. Modes: The TMC2209 V1.3 UART stepper motors support UART, STEP/ DIR Mode, except that you need to modify the firmware for the mode you use.