Artículo: AMZ-B0CC323LS3

Hilitand

Waveform Generator, 1Hz to 500kHz Generator DDS Functional Generator Sine, Sawtooth Waveform, Function Generators

Detalles del producto
Disponibilidad
En stock
Peso con empaque
0.20 kg
Devolución
No
Condición
Nuevo
Producto de
Amazon
Viaja desde
USA

Sobre este producto
  • Specification: Item Type: Generator Material: ABS Function: For sending and receiving. Frequency Range: 1Hz-500kHz sine , the output amplitude is flat to 200kHz, and the output amplitude will decrease as the frequency increases. And 1Hz-20kHz other waveforms, but the upper limit of the adjustable frequency is not limited, if the distortion and shake requirements are not high, and the frequency of use can be further increased. Resolution: 1Hz. Output Waveform: Sine , square , triangle , forward sawtooth , reverse sawtooth , electrocardiogram, noise waves. Sine Distortion: 1%, frequency <1KHZ; 0.5%, frequency ? 1KHZ. Output Amplitude: Maximum ±10V, P-P. Output Impedance: 50 ohms. DC Offset: Maximum ±10V, with shutdown function. Save Function: All setting parameters can be saved. Output Frequency Range: Sine : 1Hz-500KHz, effective range. Square : 1Hz-20kHz, effective range. Triangle : 1Hz-20KHz, effective range. Sawtooth : 1Hz-20kHz, effective range. How to Use: 1. MODE: Waveform switch button. 2. CURSOR: Cursor steady key. 3. RUN STOP: Start to output waveform. 4. +: Frequency plus. 5. ?: Frequency minus. 6. OFFSET: Adjusts waveform offset. 7. AMP: Adjusts waveform amplitude. Package List: 1 x Generator 1 x USB Cable 1 x User Manual

Producto prohibido

Este producto no está disponible

Este producto viaja de USA a tus manos en

Conoce más detalles

Generator: DDS generator can output 1Hz-500kHz sine , 1Hz-20kHz , sawtooth , multi-function, easy to use. Practical Works: The generator can be used for testing and debugging of electronic circuits, testing and measuring the frequency characteristics and impulse response of audio amplifiers. Use: Suitable for oscilloscope scanning time factor calibration. It is the same as other waveforms from 1Hz-20kHz, but there is no limit to the upper limit of the adjustable frequency. If the distortion and jitter requirements are not high, the frequency of use can be further increased. Waveform: The output is ideal for oscilloscope attenuator and probe pulse characteristic adjustment, etc. Specification: Able to output 1Hz-500kHz sine , 1Hz-20kHz waveform, sawtooth waveform, and waveform.