Artículo: AMZ-B09T3RT5MG

OONO

Wired DC-DC 10Amp Isolated Solid State Relay Module, SSR in 3-32VDC Out 5-30VDC, for Raspberry-Pi Arduino ESP32 PLC MCU DSP

Detalles del producto

Disponibilidad
En stock

Peso con empaque
0.20 kg

Devolución
Sí

Condición
Nuevo

Producto de
Amazon

Viaja desde
USA

Sobre este producto

Feature: 1, Photocoupler isolation between input control signal and controlled power, isolation surge voltage up to 5000V. 2, Input signal turn-on voltage DC 3 to 32V, turn-off voltage DC 0 to 0.8V. LED indication for relay turn-on. 3, Output voltage range: DC 5 to 30V. Maximum on-state average current 10 Amp. Maximum on-state current 20 Amp (<2 second). Non repetitive surge peak on-state current: 160 Amp (<400uS). Maximum on-state resistance 8 milliohms(0.008 ohm). 4, This is a simple and practical solid state relay module, which is very convenient to use, for Arduino, Raspberry Pi, ESP32, PLC or other projects. The GPIO of these controllers are directly connected to this relay input to control the 5 to 30V high current DC power. 5, Compact ABS plastic case and wires connect for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw. 6, Compared with traditional electromagnetic relays, it has the advantages of long operating life, rapid on-off, no ignition arc and bounce, thus reducing electromagnetic interference. In addition, its action is quiet and does not produce annoying "ka-da" sounds. Characteristic Parameters: Input Signal Control Terminal: Action Voltage: 3 ~ 32 VDC. Current: 5mA at 3VDC, 6mA at 5VDC, 8mA at 12VDC, 11mA at 24VDC, 13mA at 32VDC. Turn off voltage: 0 ~ 0.8 VDC. In-Out isolation surge voltage: 5000V. Output Terminal: Load voltage range: 5 to 30 VDC. Max. on-state average current: 10 Amp. Max. on-state current: 20 Amp (<2 second). Non repetitive surge peak on-state current: 160 Amp (<400uS). Max. on-state resistance: 8 milliohms(0.008 ohm) Load type: General purpose. Turn-on delay time: 5 to 7 uS Turn-off delay time: 60 to 70uS

$34,97

31% OFF

$24,12

$34,97

31% OFF

$24,12

Envío gratis

Llega en 12 a 16 días hábiles

Tienes garantia de entrega

Medios de pago

Cantidad

Este producto viaja de USA

a tus manos en

Medios de pago

Conoce más detalles

Photocoupler isolation between input control signal and controlled power, isolation surge voltage up to 5000V. Input signal turn-on voltage DC 3 to 32V, turn-off voltage DC 0 to 0.8V. LED indication for relay turn-on. Output voltage range: DC 5 to 30V. Maximum on-state average current 10 Amp. Maximum on-state current 20 Amp (< 2 second). Non repetitive surge peak on-state current: 160 Amp (<400uS). Maximum on-state resistance 8 milliohms(0.008 ohm). This is a simple and practical solid state relay module, which is very convenient to use, for Arduino, Raspberry Pi, ESP32, PLC or other projects. The GPIO of these controllers are directly connected to this relay input to control the 5 to 30V high current DC power. Compact ABS plastic case and wires connect for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw.

Wired DC-DC 10Amp Isolated Solid State Relay Module, SSR in 3-32VDC Out 5-30VDC, for Raspberry-Pi Arduino ESP32 PLC MCU DSP

Conoce más detalles

OONO 16 Amp 2x12 Position Terminal Block Distribution Module for AC DC

30Amp 300V 2x12 Position Terminal Block Distribution Module. OONO D-1659GP

DC Power Distribution Module, Rocker Switch, Fused, Pluggable Top Wiring Terminal Block, DIN Rail and Screw Mount (4 Channel)

16Amp 300V 4x5 Position Terminal Block Distribution Module. OONO D-1657GP

DIN Rail Mount Rocker Switch Module, 10Amp 250VAC/50VDC (8 Channel)

AC Power Distribution Module, Rocker Switch, Fused, Pluggable Top Wiring Terminal Block, DIN Rail and Screw Mount (12 Channel)

Manual and Automatic Transfer Switch, AC120V 15A ATS Auto Transfer Switch (NEMA 5-15P + 5-15R)

DC Power Distribution Module, Rocker Switch, Fused, Pluggable Top Wiring Terminal Block, DIN Rail and Screw Mount (8 Channel)

DC Power Fuse Distribution Strip Module (12 Position, DIN Rail Mount)

Slim DIN Rail Mount 10A/300V Pluggable Screw Terminal Block Distribution Module (5x3 Position)

DC 8 Channel Toggle Switch Power Distribution Module, DIN Rail Mount

AC Power Distribution Module, Rocker Switch, Fused, Pluggable Top Wiring Terminal Block, DIN Rail and Screw Mount (16 Channel)

OONO Forward and Reverse Relay Module for Motor/Linear Actuator, Reversing Relay Module (DC 12V)

AC/DC 24V SPST 20Amp 250Vac/30Vdc Latching Relay Module, Plastic Enclosure Wired, OONO F-1060

OONO 16 Amp 2x12 Position Terminal Block Distribution Module for AC DC

OONO 30Amp 48V 2x6 Position Terminal Block Distribution Module

30Amp 300V 2x12 Position Terminal Block Distribution Module. OONO D-1659GP

16Amp 300V 15x2 Position Terminal Block Distribution Module. OONO D-1658GP

AC120V Power Relay Module SPSP-NO + Override Switch, 10Amp 125VAC, 6A 250VAC/30Vdc, Plastic Enclosure and Pre-Wired

AC208-240V On/Off Switching Electric Heating Relay with Built-in 24V Transformer, OONO F-1067

SPDT 10Amp Power Relay Module, Plastic Enclosure and Pre-Wired (AC 208-277V)