Artículo: AMZ-B09KVF915M

ElecGear

ElecGear Replacement Joystick and Drift Fix PCB for Controllers, Analog Stick Controller Sensor Thumbsticks for PS5, PS4, Xbox, Xbox Elite, Switch Pro and more by ALPS and FU, Models from EL1 to EL7

Color:

EL1 ALPS 10K for PS4

EL2 FU 10K for PS4 / PS3

EL3 for Switch Pro / PS3

EL4 compatible with Xbox

EL6 ALPS 2.1K for PS5 / PS4

EL7 FU 2.3K for PS5

Detalles del producto
Disponibilidad
Sin stock
Peso con empaque
0.20 kg
Devolución
No
Condición
Nuevo
Producto de
Amazon
Viaja desde
USA

Sobre este producto
  • Please take a look at product ID: B0BK7169M8 for the desoldering kit, and B0BGPCCYH8 for solving drifting problem EL5 for Xbox Elite 2 controller 4x replacement analog joystick work with Xbox Elite Series 2 wireless controller. The thumbstick module was made by ALPS. The stick controller comes with 10KΩ trimmer potentiometers. This special version of analog stick is totally different from others. It is for Xbox Elite 2 wireless controller alone. It’s not interchangeable with other ALPS versions ✔ Replace the wiper alone even without soldering In some cases, you can just replace the wheel in the potentiometer to solve specific problems like: Stuttering, dead zone, creeping, or not as responsive as it should be ✔ Replace the potentiometer alone with an iron 80% chances of joystick problem are caused by the sensor. In another words, the rotary mechanism and the tactile switches are not the problem. De-soldering the unit with only 3Pin can be easier than replacing the entire module with as many as 14 prongs ✔ A heat gun to replace the whole module This is the most suggested for an experienced soldering expert ✔ Experts with a normal iron to replace the whole unit For a soldering expert with no professional de-soldering wick braid, solder sucker pump or hot air rework station at hand. To make it easy, we suggest crushing the problem joystick into small enough pieces with a pair of pliers ✔ By professional technicians in a cellphone repair shop Suggested for someone with no handy tools

Sin stock

Seleccione otra opción o busque otro producto.

Este producto viaja de USA a tus manos en

Conoce más detalles

[EL5 for Xbox Elite 2 Controller] – 4x replacement analog joystick work with Xbox Elite Series 2 wireless controller. The thumbstick module was made by ALPS. The stick controller comes with 10KΩ trimmer potentiometers [Compatibility] – This special version of analog stick is totally different from others. It is for Xbox Elite 2 wireless controller alone. It’s not interchangeable with other ALPS versions [Additional Resistor] – Complicated moving mechanism and daily wear and tear finally caused drifting. Even new sensors cannot be 100% balanced. Calibrating in controller settings might not work. We packed 10x correction resistors to solve the potential problem in hardware level. Solder one or two paralleled tiny resistors onto the potentiometer at the opposite direction against drifting. It will help correct 3 to 5 degrees drifting [When to replace] – The analog joystick needs to be replaced when your controller has the problem of drifting, creeping, stuttering, a blind spot, a dead spot, a dead zone, no reaction when clicking, or it wouldn't center after years of wear and tear. The OEM genuine repair parts ensure accuracy and prolong lifespan [Reminder of DIY] – With as many as 14 prongs, de-soldering and soldering the whole module takes serious skills. We suggest replacing the potentiometers first to solve most of the joystick problems. To desolder the entire joystick module off PCB by a normal soldering iron, please take a look at the desoldering kit at product ID: B0BK7169M8