Artículo: AMZ-B08NVK7LQW

CQRobot

CQRobot Relay Module, 5V to 30V Input/Output, DC2.1 Interface, Compatible with Raspberry Pi/Micro:bit/Arduino/Other Control Boards. for Robot, Gardening, Smart Home, RC Car and Other Projects.

Detalles del producto

Disponibilidad
En stock

Peso con empaque
0.20 kg

Devolución
No

Condición
Nuevo

Producto de
Amazon

Viaja desde
USA

Sobre este producto

Traditional relay modules have complicated wiring and are not friendly to novice manufacturers or electronic enthusiasts. CQRobot's simple relay module simplifies the wiring of traditional relays. Supports wide voltage input from 3.3V to 5.5V and DC2.1 input and output interfaces can be compatible with most power supplies, battery boxes, DC power supplies, mobile power supplies and other interfaces. Relay retains the functions of NC and NO, It is possible to switch between normally open and normally closed only by simply adjusting the toggle switch, Compatible with Raspberry Pi, Micro:bit, Arduino and other main control boards. for in robotics, lighting, smart home, surveillance and other projects.SPECIFICATIONRelay Module Specifications - VIN Operating Voltage: 5V to 30V - VIN Operating Current: 0A to 2.5A - Logic Power Supply: 3.3V to 5.5V - Logic Signal: 3.3 to 5.5V - Operating Temperature: -55 Degree Celsius to +150 Degree Celsius - Switching Characteristics: T(on)= 20us / T(off)= 50us - Switching Trequency: 1kHz - Dimension: 43mm * 30mmCable Specifications - Cable specifications: 22AWG - Material: Silicone - Withstand Voltage: Less Than 50V - Withstand Current: Less Than 1000MA - Length: 21cm - Line Sequence: Black-Negative Power Supply, Red-Positive Power Supply, Green-Signal Terminal.SHIPPING LIST1 * Relay Module 1 * JST 3-Pin Cable 2 * DC2.1 Power Adapter Male 2 * DC2.1 Male to Male 1 * DC2.1 Female to USB Male 1 * DC2.1 Female to USB Female 1 * Acrylic Shell Mounting Bracket kit

$101,92

55% OFF

$46,33

$101,92

55% OFF

$46,33

Envío gratis

Llega en 16 a 26 días hábiles

Tienes garantia de entrega

Medios de pago

Cantidad

Este producto viaja de USA

a tus manos en

Medios de pago

Conoce más detalles

The output and input terminals of the relay module are equipped with DC2.1 interface adapters, which simplifies the wiring of traditional relays. The input or output voltage is 5V to 30V, which is compatible with most power supplies, battery boxes, DC power supplies, and power banks. While the relay module simplifies the wiring method, it retains the functions of the relay NC and NO, and only uses a simple adjustment toggle switch to switch between normally open and normally closed modes. Adopt standard sensor interface, support 3.3V to 5.5V wide voltage input, Compatible with Raspberry Pi, Micro:bit, Arduino and other main control boards. Suitable for robots, lighting, gardening, smart home, safety protection, RC car model and other projects.

CQRobot Relay Module, 5V to 30V Input/Output, DC2.1 Interface, Compatible with Raspberry Pi/Micro:bit/Arduino/Other Control Boards. for Robot, Gardening, Smart Home, RC Car and Other Projects.

Conoce más detalles

CQRobot VL53L1X Time-of-Flight (ToF) Long Distance Ranging Sensor, Compatible with Raspberry Pi/Arduino/STM32 Board, I2C Interface. for Mobile Robot, UAV, Detection Mode, Camera, Smart Home.

CQRobot ATX Power Supply Breakout Board and Acrylic Case Kit. with ADJ Adjustable Voltage Knob, Supports 3.3V, 5V, 12V and 1.5V-9.0V Output, 2A Maximum Output, Reset Protection.

CQRobot TSL25911FN Ambient Light Sensor Compatible with Raspberry Pi, Arduino, STM32. 0 to 88000Lux Detection Range, 600M: 1 Wide, for Industry, Mobile Phone, Computer, Lighting, GPS, etc.

DFRobot Gravity: IO Expansion Shield for Arduino V7.1

5pcs W5500 Module SPI Interface Board

Robotbit Robotics Expansion Board for Micro:bit – Drives 4 DC Motors, 8 Servos, 8 GPIO Ports, with Onboard Power Management

General Multi-Functional Driver Board for Robots, Based on ESP32-WROOM-32 Module, Support WiFi, Bluetooth and ESP-Now Communications, Compatible with Raspberry Pi and Jetson Nano

SunFounder Universal Maker Sensor Kit Compatible with Arduino Mega 2560/Uno R3/R4 Minima/WiFi Nano, Raspberry Pi 5/4B/3B+/Zero 2 W/, Pico W, ESP32, C++, Python, MicroPython, Beginners & Engineers

3D Printer CNC Controller Ardiuno CNC kit with for ArduinoIDE,Longruner GRBL CNC Shield Board+RAMPS 1.4 Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema17 Stepper Motor LKB02,Black

CQRobot 270:1 Metal DC Geared-Down Motor 37Dx72.5L mm 6V/12V, with 64 CPR Encoder and Bracket. 6V-3W-20RPM-40 kg.cm(556 oz.in), 12V-6W-40RPM-70 kg.cm(972 oz.in), D-Shaped Output Shaft 16mm.

CQRobot Speaker 3 Watt 8 Ohm Compatible with Arduino Motherboard, JST-PH2.0 Interface. It is Ideal for a Variety of Small Electronic Projects.

CQRobot Speaker 3 Watt 4 Ohm Compatible with Arduino Motherboard, JST-PH2.0 Interface. It is Ideal for a Variety of Small Electronic Projects.

CQRobot Non-Contact Water/Liquid Level Sensor Compatible with Arduino, Raspberry Pi and Other Motherboards. for Industrial Production, Aquarium, Chemical Solution, Agriculture, Gardening, etc.

CQRobot 90:1 Metal DC Geared-Down Motor 37Dx70L mm 6V/12V, with 64 CPR Encoder and Bracket. 6V-5W-60RPM-18 kg.cm(250 oz.in), 12V-10W-120RPM-32 kg.cm(444 oz.in), D-Shaped Output Shaft 16mm.

CQRobot MCP23017 IO Expansion Board Compatible with Raspberry Pi/Micro:bit/Arduino/STM32. I2C Interface Control, 2 Signal Pins Increase to 16 Input/Output Pins, Supports UP to 8 Simultaneous Uses.

CQRobot 70:1 Metal DC Geared-Down Motor 37Dx54.8L mm 6V or 12V with Mounting Bracket Kit. 6V-5W-75RPM-15 kg.cm(208 oz.in), 12V-10W-150RPM-27 kg.cm(375 oz.in), D-Shaped Output Shaft Long 16mm.

CQRobot DMX Shield MAX485 Chipset Compatible with Arduino Motherboard (RDM Capable), with XLR 3-Pin Male/Female Connectors, Device into DMX512 Network, LED/Music Remote Device Management Capable.

CQRobot VL53L1X Time-of-Flight (ToF) Long Distance Ranging Sensor, Compatible with Raspberry Pi/Arduino/STM32 Board, I2C Interface. for Mobile Robot, UAV, Detection Mode, Camera, Smart Home.

CQRobot Miniature Loudspeaker 3 Watt 4 Ohm Passive Enclosed Audio/Woofer Speaker Compatible with Arduino Board. 2.54mm Dupont Interface, for a Variety of Small DIY Electronic Projects.

CQRobot 5.8GHz Doppler Effect Microwave Motion Sensor Compatible with Arduino and Raspberry Pi Motherboard. for Industry, Transportation, Agriculture, Smart Home, Security Monitoring, etc.

CQRobot JST XH 2.54 mm Pitch 5-Pin Electronic Computer Connector IC Male Plugs, Female Sockets Housing and T-Shaped Crimp Terminal Kit. 50 Sets/350 Pieces Wire-to-Board Adapter Cable Assembly.

Información útil

Centro de ayuda

Todo en un solo lugar

Comprá con tranquilidad

CQRobot Relay Module, 5V to 30V Input/Output, DC2.1 Interface, Compatible with Raspberry Pi/Micro:bit/Arduino/Other Control Boards. for Robot, Gardening, Smart Home, RC Car and Other Projects.

Conoce más detalles

Productos Relacionados

CQRobot VL53L1X Time-of-Flight (ToF) Long Distance Ranging Sensor, Compatible with Raspberry Pi/Arduino/STM32 Board, I2C Interface. for Mobile Robot, UAV, Detection Mode, Camera, Smart Home.

CQRobot ATX Power Supply Breakout Board and Acrylic Case Kit. with ADJ Adjustable Voltage Knob, Supports 3.3V, 5V, 12V and 1.5V-9.0V Output, 2A Maximum Output, Reset Protection.

CQRobot TSL25911FN Ambient Light Sensor Compatible with Raspberry Pi, Arduino, STM32. 0 to 88000Lux Detection Range, 600M: 1 Wide, for Industry, Mobile Phone, Computer, Lighting, GPS, etc.

DFRobot Gravity: IO Expansion Shield for Arduino V7.1

5pcs W5500 Module SPI Interface Board

Robotbit Robotics Expansion Board for Micro:bit – Drives 4 DC Motors, 8 Servos, 8 GPIO Ports, with Onboard Power Management

General Multi-Functional Driver Board for Robots, Based on ESP32-WROOM-32 Module, Support WiFi, Bluetooth and ESP-Now Communications, Compatible with Raspberry Pi and Jetson Nano

SunFounder Universal Maker Sensor Kit Compatible with Arduino Mega 2560/Uno R3/R4 Minima/WiFi Nano, Raspberry Pi 5/4B/3B+/Zero 2 W/, Pico W, ESP32, C++, Python, MicroPython, Beginners & Engineers

3D Printer CNC Controller Ardiuno CNC kit with for ArduinoIDE,Longruner GRBL CNC Shield Board+RAMPS 1.4 Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema17 Stepper Motor LKB02,Black

Otros Productos

CQRobot 270:1 Metal DC Geared-Down Motor 37Dx72.5L mm 6V/12V, with 64 CPR Encoder and Bracket. 6V-3W-20RPM-40 kg.cm(556 oz.in), 12V-6W-40RPM-70 kg.cm(972 oz.in), D-Shaped Output Shaft 16mm.

CQRobot Speaker 3 Watt 8 Ohm Compatible with Arduino Motherboard, JST-PH2.0 Interface. It is Ideal for a Variety of Small Electronic Projects.

CQRobot Speaker 3 Watt 4 Ohm Compatible with Arduino Motherboard, JST-PH2.0 Interface. It is Ideal for a Variety of Small Electronic Projects.

CQRobot Non-Contact Water/Liquid Level Sensor Compatible with Arduino, Raspberry Pi and Other Motherboards. for Industrial Production, Aquarium, Chemical Solution, Agriculture, Gardening, etc.

CQRobot 90:1 Metal DC Geared-Down Motor 37Dx70L mm 6V/12V, with 64 CPR Encoder and Bracket. 6V-5W-60RPM-18 kg.cm(250 oz.in), 12V-10W-120RPM-32 kg.cm(444 oz.in), D-Shaped Output Shaft 16mm.

CQRobot MCP23017 IO Expansion Board Compatible with Raspberry Pi/Micro:bit/Arduino/STM32. I2C Interface Control, 2 Signal Pins Increase to 16 Input/Output Pins, Supports UP to 8 Simultaneous Uses.

CQRobot 70:1 Metal DC Geared-Down Motor 37Dx54.8L mm 6V or 12V with Mounting Bracket Kit. 6V-5W-75RPM-15 kg.cm(208 oz.in), 12V-10W-150RPM-27 kg.cm(375 oz.in), D-Shaped Output Shaft Long 16mm.

CQRobot DMX Shield MAX485 Chipset Compatible with Arduino Motherboard (RDM Capable), with XLR 3-Pin Male/Female Connectors, Device into DMX512 Network, LED/Music Remote Device Management Capable.

CQRobot VL53L1X Time-of-Flight (ToF) Long Distance Ranging Sensor, Compatible with Raspberry Pi/Arduino/STM32 Board, I2C Interface. for Mobile Robot, UAV, Detection Mode, Camera, Smart Home.

CQRobot Miniature Loudspeaker 3 Watt 4 Ohm Passive Enclosed Audio/Woofer Speaker Compatible with Arduino Board. 2.54mm Dupont Interface, for a Variety of Small DIY Electronic Projects.

CQRobot 5.8GHz Doppler Effect Microwave Motion Sensor Compatible with Arduino and Raspberry Pi Motherboard. for Industry, Transportation, Agriculture, Smart Home, Security Monitoring, etc.

CQRobot JST XH 2.54 mm Pitch 5-Pin Electronic Computer Connector IC Male Plugs, Female Sockets Housing and T-Shaped Crimp Terminal Kit. 50 Sets/350 Pieces Wire-to-Board Adapter Cable Assembly.

Compra protegida

¿Cómo comprar?

Información de Aduanas Ecuador

Garantía de entrega

¿Cómo solicitar una devolución?

Los productos sin devolución son:

Tarjetas de Débito y Crédito

Pagos a través de PayPal

¿Cómo comprar?

Hacemos todo por ti

Tarjetas de Débito, Crédito y Deuna

Pagos a través de Deuna

Pagos a través de PayPal

Garantía de entrega

Compra como si vivieras fuera, pero desde cualquier lugar de Ecuador