Artículo: AMZ-B07QJZBXYC

MakerFocus

MakerFocus Raspberry Pi Zero W Official Case, RPI Zero ABS Box Cover Shell Enclosure Cases Compatible for Raspberry Pi Zero V1.3, Zero with 2pcs 15cm Camera FFC Flex Cable

Detalles del producto

Disponibilidad
Sin stock

Peso con empaque
0.20 kg

Devolución
No

Condición
Nuevo

Producto de
Amazon

Viaja desde
USA

Sobre este producto

The Raspberry Pi Zero housing is composed of two parts. It has a standard base with a cut-out to allow access to the GPIO, and a choice of three Lids: a smooth lid, a GPIO lid (which allows access to the GPIO from above) and a lid of the camera (which, when used with the supplied short camera cable, Allows the Raspberry Pi camera or the Noir camera to be installed perfectly inside it). Features: Suitable for Raspberry Pi Zero V1.3 and Raspberry Pi Zero W. Designed with Pi HAT's in mind. Removable Top Frame. Removable Lid provides easy access to the camera and display ports, Removable Side Panels with easy access to the GPIO port. With 1pcsShort camera cableand 2pcs15CM FFT camera cablefor you easy to use the camera Description: Material: ABS Color: white and red Camera cable length: 1pcs 3.7CM; 2pcs 15CM Size: 80*37mm Weight: 28g 2pcs 15CM FFT camera cable: RPI camera cable, Specially designed for raspberry pi zero w and raspberry pi zero w camera. Easy to install, Perfect show video; Length 15cm easy to adjust the distance. 22 pin ribbon cable, One end of the cable is 15 Pin 1.0mm Pitch interface and the other end with 22 Pin 0.5mm interface. Utilize high quality flexible FCC cable which is extremely soft and compact. Package Including: 1 * Red Base 3 * White Case cover(plain, GPIO, camera) 1 * 3.7CM Short camera cable 2 * 15CM FFT camera cable 4 * Rubber feet

Sin stock

Seleccione otra opción o busque otro producto.

Este producto viaja de USA

a tus manos en

Medios de pago

Conoce más detalles

Suitable for Raspberry Pi Zero V1.3 and Raspberry Pi Zero W Designed with Pi HAT's in mind; Removable top frame With 1pcs short camera cable and 2pcs 15CM FFC camera cable for you easy to use the camera Removable lid provides easy access to the camera and display ports Removable side panels with easy access to the GPIO port

MakerFocus Raspberry Pi Zero W Official Case, RPI Zero ABS Box Cover Shell Enclosure Cases Compatible for Raspberry Pi Zero V1.3, Zero with 2pcs 15cm Camera FFC Flex Cable

Conoce más detalles

SmallRig Mini Follow Focus with A/B Stops & 15mm Rod Clamp and Snap-on Gear Ring Belt for DLSRs and Mirrorless Cameras, Fits Different Diameter Lenses Up to 114mm

CZQC Follow Focus Zoom Lever 2PCS Adjustable Manual Flexible Focus Gear Ring Belt and Handle for DSLR Camera Zoom Lens

SmallRig Seamless Focus Gear Ring (62.5mm to 64.5mm) - 3291

SmallRig Wireless Follow Focus Kit (Lite) with Handwheel Controller & Receiver Motor, A/B Stops & 15mm Rod Clamp, Compact Design, Widely Compatible with Cinema and Zoom Lenses with High Damping - 4296

Tilta Pocket Follow Focus | Precise Focus Ring with A/B Stops | Fluid Damping System | 15mm Rod & Rod Holder | Works with Most Cameras & Lenses | Lightweight, Comfortable, and Compact Design (FF-T07)

OCQOTAT Photography Cheat Sheet for DSLR Camera Accessories for Canon Nikon Sony,Quick Reference Cards Photographers Book for Beginners,Settings,Exposure, Modes,Composition,Lighting, etc.4×3 Inch

DSLR Cheat Sheet Photography Accessories Camera Accessories for Canon Nikon Sony Photography Gifts for Photographer Quick Reference Cards Guides Tips Settings Exposure Modes Composition And More 4×3in

DSLRKIT Lens Focus Calibration Tool Alignment Ruler Folding Card(Pack of 6)

NEEWER Mini Follow Focus with A/B Stops, Lens Gear Ring, 15mm Rod & Rod Clamp for Cinema Camera, DSLR/Mirrorless Camera, Compatible with Lens Diameter Up to 114mm, PG001 (Silver)

Fotodiox Replacement Gear Belt for Video Follow Focus Drives

SMALLRIG Handle with Follow Focus for DJI RS 2 / RS 3 Pro/RS 4 / RS 4 Pro/RS 5 Gimbal Stabilizer, Handle with 1/4"-20 locating Holes and a Cold Shoe Mount, Max Load 4.4lb

SMALLRIG Module Top Handle for DJI Focus Pro LiDAR, Integrated 23cm / 9.05in Measuring Scale and Telescoping Rail, Anti-Slip Grip with Cold Shoes, Locating Holes for ARRI, 1/4"-20 Threaded Holes-5236

MakerFocus ESP32 LoRa V3 Development Board with 3000mAh Battery and 915MHz Antenna, Integrated WiFi Bluetooth SX1262 CP2102 0.96-inch OLED Display Type C for Meshtastic IoT Arduino Intelligent Scene

MakerFocus ESP32 LoRa V3 Development Board with 915 MHz Antenna Integrated WiFi Bluetooth SX1262 CP2102 0.96-inch OLED Display Type C for Meshtastic IoT Arduino Intelligent Scenes

MakerFocus 2pcs ESP32 LoRa V3 Development Board with 2pcs 3000mAh Battery, 915MHz Antenna Integrated WiFi Bluetooth SX1262 CP2102 0.96-inch OLED Display for Meshtastic IoT Arduino Intelligent Scene

MakerFocus 2pcs 0.91 Inch I2C IIC OLED Display Module 128 x 32 Pixel SSD1306 Driver Self-Luminous Display Board for Arduino/Raspberry Pi/ESP32 (White)

MakerFocus 4pcs 3D Printer Fan 12V, 40mm 12 Volt 0.08A DC Mini Quiet Cooling 40 x 40 x10mm with 28cm Cable for 3D Printer, DVR and Other Small Appliances Series Repair Replacement

MakerFocus 4pcs 3.7V Lithium Rechargeable Battery JST1.25 Connector 2pin, 952540 3.7V 1000mAh Battery with Protection Board and Insulated Rubber Tape Compatible with ESP32 Development Board

MakerFocus 15pcs TP4056 Charging Module Type C Interface with Battery Protection 18650 BMS 5V 1A 18650 Lithium Battery Charging Board

MakerFocus TF-Luna LiDAR Range Finder Sensor Module, Single-Point Micro Ranging Module 0.2 to 8m Compatible with Pixhawk, Arduino and Raspberry Pi with UART / I2C Communication Interface

MakerFocus 2pcs 1.3 Inch I2C IIC OLED Display Module 128 x 64 Pixel SH1106 Self-Luminous Display Board for Arduino/Raspberry Pi/ESP32

MakerFocus 2 Set ESP32 LoRa V3 Development Board with 915 MHz Antenna and Case Integrated WiFi Bluetooth SX1262 CP2102 0.96-inch OLED Display Type C for Meshtastic IoT Arduino Intelligent Scenes

MakerFocus 5pcs 0.91 Inch I2C IIC OLED Display Module 128 x 32 Pixel SSD1306 Driver Self-Luminous Display Board for Arduino/Raspberry Pi/ESP32 (Pre-Soldered, White)

MakerFocus TFmini-s Micro LiDAR Module 0.1-12M LiDAR Range Finder Sensor Obstacle Avoidance Sensor Tiny Module Single Point UART I2C IO Compatible with Pixhawk Arduino and Raspberry Pi

Información útil

Centro de ayuda

Todo en un solo lugar

Comprá con tranquilidad

MakerFocus Raspberry Pi Zero W Official Case, RPI Zero ABS Box Cover Shell Enclosure Cases Compatible for Raspberry Pi Zero V1.3, Zero with 2pcs 15cm Camera FFC Flex Cable

Conoce más detalles

Productos Relacionados

SmallRig Mini Follow Focus with A/B Stops & 15mm Rod Clamp and Snap-on Gear Ring Belt for DLSRs and Mirrorless Cameras, Fits Different Diameter Lenses Up to 114mm

CZQC Follow Focus Zoom Lever 2PCS Adjustable Manual Flexible Focus Gear Ring Belt and Handle for DSLR Camera Zoom Lens

SmallRig Seamless Focus Gear Ring (62.5mm to 64.5mm) - 3291

SmallRig Wireless Follow Focus Kit (Lite) with Handwheel Controller & Receiver Motor, A/B Stops & 15mm Rod Clamp, Compact Design, Widely Compatible with Cinema and Zoom Lenses with High Damping - 4296

Tilta Pocket Follow Focus | Precise Focus Ring with A/B Stops | Fluid Damping System | 15mm Rod & Rod Holder | Works with Most Cameras & Lenses | Lightweight, Comfortable, and Compact Design (FF-T07)

OCQOTAT Photography Cheat Sheet for DSLR Camera Accessories for Canon Nikon Sony,Quick Reference Cards Photographers Book for Beginners,Settings,Exposure, Modes,Composition,Lighting, etc.4×3 Inch

DSLR Cheat Sheet Photography Accessories Camera Accessories for Canon Nikon Sony Photography Gifts for Photographer Quick Reference Cards Guides Tips Settings Exposure Modes Composition And More 4×3in

DSLRKIT Lens Focus Calibration Tool Alignment Ruler Folding Card(Pack of 6)

NEEWER Mini Follow Focus with A/B Stops, Lens Gear Ring, 15mm Rod & Rod Clamp for Cinema Camera, DSLR/Mirrorless Camera, Compatible with Lens Diameter Up to 114mm, PG001 (Silver)

Fotodiox Replacement Gear Belt for Video Follow Focus Drives

SMALLRIG Handle with Follow Focus for DJI RS 2 / RS 3 Pro/RS 4 / RS 4 Pro/RS 5 Gimbal Stabilizer, Handle with 1/4"-20 locating Holes and a Cold Shoe Mount, Max Load 4.4lb

SMALLRIG Module Top Handle for DJI Focus Pro LiDAR, Integrated 23cm / 9.05in Measuring Scale and Telescoping Rail, Anti-Slip Grip with Cold Shoes, Locating Holes for ARRI, 1/4"-20 Threaded Holes-5236

Otros Productos

MakerFocus ESP32 LoRa V3 Development Board with 3000mAh Battery and 915MHz Antenna, Integrated WiFi Bluetooth SX1262 CP2102 0.96-inch OLED Display Type C for Meshtastic IoT Arduino Intelligent Scene

MakerFocus ESP32 LoRa V3 Development Board with 915 MHz Antenna Integrated WiFi Bluetooth SX1262 CP2102 0.96-inch OLED Display Type C for Meshtastic IoT Arduino Intelligent Scenes

MakerFocus 2pcs ESP32 LoRa V3 Development Board with 2pcs 3000mAh Battery, 915MHz Antenna Integrated WiFi Bluetooth SX1262 CP2102 0.96-inch OLED Display for Meshtastic IoT Arduino Intelligent Scene

MakerFocus 2pcs 0.91 Inch I2C IIC OLED Display Module 128 x 32 Pixel SSD1306 Driver Self-Luminous Display Board for Arduino/Raspberry Pi/ESP32 (White)

MakerFocus 4pcs 3D Printer Fan 12V, 40mm 12 Volt 0.08A DC Mini Quiet Cooling 40 x 40 x10mm with 28cm Cable for 3D Printer, DVR and Other Small Appliances Series Repair Replacement

MakerFocus 4pcs 3.7V Lithium Rechargeable Battery JST1.25 Connector 2pin, 952540 3.7V 1000mAh Battery with Protection Board and Insulated Rubber Tape Compatible with ESP32 Development Board

MakerFocus 15pcs TP4056 Charging Module Type C Interface with Battery Protection 18650 BMS 5V 1A 18650 Lithium Battery Charging Board

MakerFocus TF-Luna LiDAR Range Finder Sensor Module, Single-Point Micro Ranging Module 0.2 to 8m Compatible with Pixhawk, Arduino and Raspberry Pi with UART / I2C Communication Interface

MakerFocus 2pcs 1.3 Inch I2C IIC OLED Display Module 128 x 64 Pixel SH1106 Self-Luminous Display Board for Arduino/Raspberry Pi/ESP32

MakerFocus 2 Set ESP32 LoRa V3 Development Board with 915 MHz Antenna and Case Integrated WiFi Bluetooth SX1262 CP2102 0.96-inch OLED Display Type C for Meshtastic IoT Arduino Intelligent Scenes

MakerFocus 5pcs 0.91 Inch I2C IIC OLED Display Module 128 x 32 Pixel SSD1306 Driver Self-Luminous Display Board for Arduino/Raspberry Pi/ESP32 (Pre-Soldered, White)

MakerFocus TFmini-s Micro LiDAR Module 0.1-12M LiDAR Range Finder Sensor Obstacle Avoidance Sensor Tiny Module Single Point UART I2C IO Compatible with Pixhawk Arduino and Raspberry Pi

Compra protegida

¿Cómo comprar?

Información de Aduanas Ecuador

Garantía de entrega

¿Cómo solicitar una devolución?

Los productos sin devolución son:

Tarjetas de Débito y Crédito

Pagos a través de PayPal

¿Cómo comprar?

Hacemos todo por ti

Tarjetas de Débito, Crédito y Deuna

Pagos a través de Deuna

Pagos a través de PayPal

Garantía de entrega

Compra como si vivieras fuera, pero desde cualquier lugar de Ecuador