Artículo: AMZ-B07DLGCFF5

Battery Watering Technologies

Battery Water Deionizer Replacement Cartridge

Detalles del producto
Disponibilidad
En stock
Peso con empaque
3.89 kg
Devolución
Condición
Nuevo
Producto de
Amazon
Viaja desde
USA

Sobre este producto
  • Replacement cartridge for Battery Watering Technology's Water Deionizer (PW-1800). Filter Cartridge Replacement: 1. Turn off water supply. Press red pressure-relief button (if present). 2. Unscrew housing. Remove large o-ring, wipe clean, and set aside. 3. Discard used filter cartridge. Wash housing with dish soap and warm water using a non-abrasive sponge or cloth. Rinse thoroughly. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly. 4. Lubricate o-ring with clean silicone grease. Insert o-ring in groove. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove. 5. Insert new filter cartridge making sure the top is facing up as indicated. 6. Screw housing onto the cap and hand-tighten. Do not over-tighten. Make sure cap standpipe slips into cartridge. 7. Turn on water supply. Press pressure-relief button to vent excess air (if present). Check for leaks before leaving installation.

Producto prohibido

Este producto no está disponible

Este producto viaja de USA a tus manos en