IR Emitter Mini Infrared Remote Control Extension Cable with 3.5mm Plug for 38-56kHz Spectrum Motorola Arris Xfinity Comcast Verizon FiOS Other STB - Set Top Boxes (Single Heads, 10FT)
En stock
0.20 kg
Sí
Nuevo
Amazon
USA
- Product Specification:3m IR Emitter - 3.5mm Mono PlugIt connects using a 3.5mm jack (similar to a pair of standard headphones)It is an IR transmitter, not a receiverTwo conductors on the the 3.5 mm jackLength: 10 FeetCompatibility: IR frequency within 38-56kHz and equipped with 3.5mm IR input port infrared repeater equipment, audio and video transmission equipment, IR remote control wireless transmitters, centralized control equipment, etc.XBox One installation:You can install this IR extension cable with Xbox One in a few simple steps:1. Connect your IR extension cable to the IR port on the back of the Xbox One2. Position the emitters near the devices you want to control. These may be designed to fit under the device near the IR window, or they may be sticky and adhere directly to the IR window3. Test to make sure you can control the device. Reposition the emitters if necessaryProduct Introduction:This IR emitter can be used as part of an IR system to transmit IR commands to 2 pieces of AV equipment that are out of sight, such as in an AV cupboard. It should be suitable for use with any IR system. Simply place the IR emitters in front of, above or below or fixed on to the IR receivers on your source devices such as a Blu-Ray player or amp and any signals fed to the emitter will be blasted out to enable control.Features:Self-adhesive tape underneath the IR emitter for quick and easy fixing to any flat surface.Package Content:1x 3.5mm Jack Infrared Emitter
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conoce más detalles
Hi, if the product you received did not work for you, please do not be angry yet. Just contact us via Message and you will get what you want directly! In this way you don't need to re-tu-rn the product and can save all the toubles! Just a word and you can what you want back! Verified by customer that this product CAN NOT work with Denon cable box and any S-o-n-y devices! Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD/DVD player, Bluray player, infrared repeater equipment, audio and video transmission equipment, IR remote control wireless transmitters, centralized control equipment, or other components which are controlled by IR signal. NOTE: Your device must have an 'IR' port so the product could work! Passes IR communication: Used with an IR Repeater kit to remote control a device, extending remote control ability to any room in the house. NOTE: Your device must have 'IR' port and the infrared frequency must be 38-56kHz so the product could work! Sticks directly onto the AV equipment; Two emitters on a single plug, adhesive backing allows the emitter to be easily attached to the IR eye of your device, extend the remote control distance immediately. Left and right 45 degree controllable. Multiple heads optional allows you to control multiple pieces of equipment with only one IR output, For use with Connecting Blocks and Home Automation controllers. The mini stick-on infrared emitter includes a 10 ft cable between the emitter heads and the mini-plug, easily meet your expectation of extending.