Esta súper oferta termina en 
Garantía de entrega
Artículo: AMZ-B077GB65G4
ITW Buildex
Red Head ITW 1/4" x 2-3/4" SPF4-234 410 Stainless Steel Flat Phillips Tapcon
Detalles del producto
Disponibilidad
En stock
En stock
Peso con empaque
1.11 kg
1.11 kg
Devolución
Sí
Sí
Condición
Nuevo
Nuevo
Producto de
Amazon
Amazon
Viaja desde
USA
USA
Sobre este producto
- Applications: The anchor is made from 410 Stainless Steel, and is Silver Climaseal Coated. This anchor is designed for use in Concrete, Block, and Brick. Environment: The anchor is designed for use in a Moist environment. Head Style: The anchor is a Flat Countersunk Phillips head and is designed to prevent the head from protruding above the surface of the item being attached. Hole Diameter/Bit Diameter: The anchor requires a 3/16" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. Driver Required: A #3 is required for driving the anchor into the base material. Diameter of Anchor: The diameter of the anchor is 1/4". Length Anchor: The length of the anchor is 2-3/4". Thread Length: The length of the threads on the anchor is 1-3/4" in length. Minimum Embedment: The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete. Maximum Fixture Thickness: The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-3/4". This will ensure that the minimum embedment of 1" will be met. Fixture Hole Diameter: The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4" diameter anchor requires the hole in the fixture to be 5/16". Spacing between Anchors: Each anchor must be spaced a minimum distance of 4" from each other when measured center to center. Edge Distance: It is very important not to install the anchor any closer than 3" from an unsupported edge of the concrete.
$121,46
11% OFF
$108,21
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
★ APPLIES FRANCHISE
$121,46
11% OFF
$108,21
2 meses de gracia con Pacificard
Envío gratis
Llega en 5 a 12 días hábiles
Con envío
Tienes garantia de entrega
Este producto viaja
de USA ![]()
a tus manos en
![]()
a tus manos en
Conoce más detalles
BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost FLAT PHILLIPS HEAD--Can be driven with Phillips Screw Driver SELF-TAPPING-Taps threads directly into masonry and requires no other anchor DIAMOND POINT-Easier to drive the screw to save time
Compra protegida
Disfruta de una experiencia de compra segura y confiable
![]()
Garantía de entrega
Con Tiendamia todas tus compras cuentan con Garantía de Entrega o devolución total de tu dinero.
Compras 100% seguras y garantizadas, para que pidas lo que sueñas y lo recibas del mundo a tu puerta.
Tarjetas de Débito y Crédito
Visa
Mastercard
American Express
Dinners
Discover
Alias
Pagos a través de PayPal
Compra procesada en dólares con dinero en cuenta o tarjetas internacionales.
PayPal
.svg)
