Artículo: AMZ-B075V5TZRY

MakerFocus

MakerFocus TFmini-s Micro LiDAR Module 0.1-12M LiDAR Range Finder Sensor Obstacle Avoidance Sensor Tiny Module Single Point UART I2C IO Compatible with Pixhawk Arduino and Raspberry Pi

Detalles del producto

Disponibilidad
En stock

Peso con empaque
0.20 kg

Devolución
Sí

Condición
Nuevo

Producto de
Amazon

Viaja desde
USA

Sobre este producto

Description: TFmini-s is a upgraded single-point micro ranging module based on TFmini. The blind zone is shortened to 10cm, the outdoor performance and accuracy of different reflectivity are improved, it can achieve stable, accuracy, sensitive and high frequency range detection. TFmini-s is compatible with both the UART and I2C interface. Different interfaces can be switched by commands. Performance: Operating Range : 0.1m~12m@90%Reflectivity Accuracy: ±6cm@(0.1-6m), ±1% @ (6m-12m) Distance Resolution: 1cm Frame Rate: 100Hz Ambient Light Immunity: 70Klux Operating Temperature: 0℃~60℃ Optical Parameters: Light Source: VCSEL Central Wavelength: 850nm Photobiological Safety: Class1 (EN60825) Electrical Parameters: Supply Voltage: 5V±0.1V Average Current: ≤140mA Power Consumption: ≤0.7W Peak Current: 200mA Communication Level: LVTTL(3.3V) Communication Interface: UART / I2C Main application scenario: Pedestrian detection Vehicle detection Intelligent barrier gate and altimeter packing list 1 * TFmini-s UART / I2C Laser Range Finder Module 2 * Cable

$128,41

55% OFF

$58,37

$128,41

55% OFF

$58,37

Envío gratis

Llega en 5 a 12 días hábiles

Con envío

Tienes garantia de entrega

Medios de pago

Cantidad

Este producto viaja de USA

a tus manos en

Medios de pago

Conoce más detalles

Upgraded LiDAR Module: TFmini-s is an upgraded single-point micro ranging module based on TFmini. The dead zone is shortened to 10 cm, and the outdoor performance and accuracy of different reflectances are improved Tiny Body Yet Big Wisdom: low-cost, small-size and low power consumption. Distance Resolution is 1cm, frame rate is 100Hz, ambient light immunity is 70Klux and central wavelength is 850nm Tiny Yet Powerful: It is based on ToF (Time of Flight) principle and integrated with unique optical and electrical designs, so as to achieve stable, precise, high sensitivity and high-speed distance detection Main Application Scenario: Pedestrian detection, vehicle detection, intelligent barrier gate and altimeter Note: TFmini-s version is UART by default. If you need I2C, please switch by yourself. It is compatible with Raspberry Pi and Arduino User Manual and Document: Please get the link from Product guides and documents below

MakerFocus TFmini-s Micro LiDAR Module 0.1-12M LiDAR Range Finder Sensor Obstacle Avoidance Sensor Tiny Module Single Point UART I2C IO Compatible with Pixhawk Arduino and Raspberry Pi

Conoce más detalles

MakerFocus ESP32 LoRa V3 Development Board with 3000mAh Battery and 915MHz Antenna, Integrated WiFi Bluetooth SX1262 CP2102 0.96-inch OLED Display Type C for Meshtastic IoT Arduino Intelligent Scene

MakerFocus 2pcs ESP32 LoRa V3 Development Board with 2pcs 3000mAh Battery, 915MHz Antenna Integrated WiFi Bluetooth SX1262 CP2102 0.96-inch OLED Display for Meshtastic IoT Arduino Intelligent Scene

MakerFocus 2pcs 0.91 Inch I2C IIC OLED Display Module 128 x 32 Pixel SSD1306 Driver Self-Luminous Display Board for Arduino/Raspberry Pi/ESP32 (White)

MakerFocus 2pcs ESP32 LoRa V3 Development Board with 915 MHz Antenna Integrated WiFi Bluetooth SX1262 CP2102 0.96-inch OLED Display Type C Interface for Meshtastic IoT Arduino Intelligent Scenes

MakerFocus 4pcs 3.7V Lithium Rechargeable Battery JST1.25 Connector 2pin, 952540 3.7V 1000mAh Battery with Protection Board and Insulated Rubber Tape Compatible with ESP32 Development Board

MakerFocus 4pcs 3D Printer Fan 12V, 40mm 12 Volt 0.08A DC Mini Quiet Cooling 40 x 40 x10mm with 28cm Cable for 3D Printer, DVR and Other Small Appliances Series Repair Replacement

MakerFocus 15pcs TP4056 Charging Module Type C Interface with Battery Protection 18650 BMS 5V 1A 18650 Lithium Battery Charging Board

MakerFocus TF-Luna LiDAR Range Finder Sensor Module, Single-Point Micro Ranging Module 0.2 to 8m Compatible with Pixhawk, Arduino and Raspberry Pi with UART / I2C Communication Interface

MakerFocus 5pcs 0.91 Inch I2C IIC OLED Display Module 128 x 32 Pixel SSD1306 Driver Self-Luminous Display Board for Arduino/Raspberry Pi/ESP32 (Pre-Soldered, White)

MakerFocus 2 Set ESP32 LoRa V3 Development Board with 915 MHz Antenna and Case Integrated WiFi Bluetooth SX1262 CP2102 0.96-inch OLED Display Type C for Meshtastic IoT Arduino Intelligent Scenes

MakerFocus 2pcs 1.3 Inch I2C IIC OLED Display Module 128 x 64 Pixel SH1106 Self-Luminous Display Board for Arduino/Raspberry Pi/ESP32

MakerFocus 4pcs 0.91 Inch I2C IIC OLED Display Module 128 x 32 Pixel SSD1306 Driver Self-Luminous Display Board for Arduino/Raspberry Pi/ESP32 (White)

Información útil

Centro de ayuda

Todo en un solo lugar

Comprá con tranquilidad

MakerFocus TFmini-s Micro LiDAR Module 0.1-12M LiDAR Range Finder Sensor Obstacle Avoidance Sensor Tiny Module Single Point UART I2C IO Compatible with Pixhawk Arduino and Raspberry Pi

Conoce más detalles

Otros Productos

MakerFocus ESP32 LoRa V3 Development Board with 3000mAh Battery and 915MHz Antenna, Integrated WiFi Bluetooth SX1262 CP2102 0.96-inch OLED Display Type C for Meshtastic IoT Arduino Intelligent Scene

MakerFocus 2pcs ESP32 LoRa V3 Development Board with 2pcs 3000mAh Battery, 915MHz Antenna Integrated WiFi Bluetooth SX1262 CP2102 0.96-inch OLED Display for Meshtastic IoT Arduino Intelligent Scene

MakerFocus 2pcs 0.91 Inch I2C IIC OLED Display Module 128 x 32 Pixel SSD1306 Driver Self-Luminous Display Board for Arduino/Raspberry Pi/ESP32 (White)

MakerFocus 2pcs ESP32 LoRa V3 Development Board with 915 MHz Antenna Integrated WiFi Bluetooth SX1262 CP2102 0.96-inch OLED Display Type C Interface for Meshtastic IoT Arduino Intelligent Scenes

MakerFocus 4pcs 3.7V Lithium Rechargeable Battery JST1.25 Connector 2pin, 952540 3.7V 1000mAh Battery with Protection Board and Insulated Rubber Tape Compatible with ESP32 Development Board

MakerFocus 4pcs 3D Printer Fan 12V, 40mm 12 Volt 0.08A DC Mini Quiet Cooling 40 x 40 x10mm with 28cm Cable for 3D Printer, DVR and Other Small Appliances Series Repair Replacement

MakerFocus 15pcs TP4056 Charging Module Type C Interface with Battery Protection 18650 BMS 5V 1A 18650 Lithium Battery Charging Board

MakerFocus TF-Luna LiDAR Range Finder Sensor Module, Single-Point Micro Ranging Module 0.2 to 8m Compatible with Pixhawk, Arduino and Raspberry Pi with UART / I2C Communication Interface

MakerFocus 5pcs 0.91 Inch I2C IIC OLED Display Module 128 x 32 Pixel SSD1306 Driver Self-Luminous Display Board for Arduino/Raspberry Pi/ESP32 (Pre-Soldered, White)

MakerFocus 2 Set ESP32 LoRa V3 Development Board with 915 MHz Antenna and Case Integrated WiFi Bluetooth SX1262 CP2102 0.96-inch OLED Display Type C for Meshtastic IoT Arduino Intelligent Scenes

MakerFocus 2pcs 1.3 Inch I2C IIC OLED Display Module 128 x 64 Pixel SH1106 Self-Luminous Display Board for Arduino/Raspberry Pi/ESP32

MakerFocus 4pcs 0.91 Inch I2C IIC OLED Display Module 128 x 32 Pixel SSD1306 Driver Self-Luminous Display Board for Arduino/Raspberry Pi/ESP32 (White)

Compra protegida

¿Cómo comprar?

Información de Aduanas Ecuador

Garantía de entrega

¿Cómo solicitar una devolución?

Los productos sin devolución son:

Tarjetas de Débito y Crédito

Pagos a través de PayPal

¿Cómo comprar?

Hacemos todo por ti

Tarjetas de Débito, Crédito y Deuna

Pagos a través de Deuna

Pagos a través de PayPal

Garantía de entrega

Compra como si vivieras fuera, pero desde cualquier lugar de Ecuador