Artículo: AMZ-B00KTCTYKQ

Sensky

Sensky BS033C 110v Motion Sensor Light Switch, 180 Degree View Occupancy Sensor Switch, Wall Sensor Switch Light Sensor,Single Pole (Neutral Wire Required), White

Detalles del producto

Disponibilidad
En stock

Peso con empaque
0.20 kg

Devolución
Sí

Condición
Nuevo

Producto de
Amazon

Viaja desde
USA

Sobre este producto

Specification Input Voltage: 110V/AC-240V/AC Power Frequency: 50/60Hz Detection Range: 180 degree Detection Distance: 9m max(less than 24 Celsius) Ambient Light: Work in LUX less than 20LUX (switch on the Auto position) Time-Delay Min: 10secs (more or less) Max: 30mins Working temperature: 20~40 Celsius Working Humidity: higher than 93% RH Rated Load: 1200W/220v (incandescent lamp) 300W/220V(energy-saving lamp) 800W/110V(incandescent lamp) 200W/110V (energy-saving lamp) Power Consumption : 0.45W (work) 0.1W (static) Detection Motion Speed: 0.6~1.5m/s Size: 70mm*115mm*35mm Note Time -delay is added continually: When it receives the second in induction signals after the first induction, it will compute time once more on the rest of the first time-delay basic(set time). Currently the temperature becomes lower, the sensitivity of the sensor would become higher, so the probability of false triggering the sensor turning on increases. We recommend to reduce the Lux value appropriately to reduce triggering motion sensor. If the switch works error, please don’t worry. Any questions or needs welcome to contact us. Attention: 1. Don't exposed to direct sun light or lighting, big wind, near a heater or air condition. 2. Don't fix it at a place where there are obstructing material (e.g. Glass, dense clothes) which IR cannot get though. 3. Don't fix it in strong shock or vibration environment.

$28,88

44% OFF

$16,05

$28,88

44% OFF

$16,05

Envío gratis

Llega en 5 a 12 días hábiles

Con envío

Tienes garantia de entrega

Medios de pago

Cantidad

Este producto viaja de USA

a tus manos en

Medios de pago

Conoce más detalles

【Neutral Wire Required Installation】: Three wires (Black, Green and Red). Black wire goes to Hot; Green wire goes to Neutral; Red wire goes to the hot end of your light (the load). Then the other end of the light and the green wire of the switch go to the Neutral. Please also see pictures carefully before you install to avoid causing any false alarm. 【Motion Sensor & Light Sensor Switch】: Automatically turn on/off lights based on room occupancy when detect hear source and environment brightness. Detection motion speed is 0.6~1.5m/s. 【Time Delay】: Adjustable Time-Delay for customizing: Min: 10sec±3sec ; Max:7min±2min (The load will stay on for the time you set, then go out). 【Three Mode】: AUTO mode works as an occupancy sensor (Auto ON, Auto OFF). ON and OFF modes allow you to override the sensor and use the sensor switch as a regular light switch. 【Energy-saving】: Motion sensor switch uses a passive infrared (PIR) sensor to energy-saving and lower bills.

Sensky BS033C 110v Motion Sensor Light Switch, 180 Degree View Occupancy Sensor Switch, Wall Sensor Switch Light Sensor,Single Pole (Neutral Wire Required), White

Conoce más detalles