0

Recibí aproximadamente entre 15 y 25 días hábiles

Pasa el mouse para ver la imagen ampliada

Myoware

2.0 Link Shield -Connect a 2.0 Muscle Sensor Compatible with Arduino R3 microcontroller -Use 3.5mm TRS Jack to Link Boards via 3.5mm TRS-to-TRS Cable -Snap connectors -Easy Stacking

8 Calificaciones

Disponibilidad: En stock

Marca: Myoware

Peso con empaque: 0.325 kg

Producto con devolución

Producto de: Amazon

MyoWare 2.0 Muscle Sensor Form Factor: 3x Female Snap Pins (Power and EMG Envelope Output): Easily connect with other Myoware boards
3.5mm TRS jack: Use Link Shield to connect MyoWare Muscle Sensor to a compatible with Arduino MicroController
Note: MyoWare and accessories are not intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation treatment, or prevention of disease, in a man or other animals
Features: Switch: ON/OFF for Power, Output Selection for RAW/RECT/ENV; LED Indicator: VIN, ENV; Reference/GND Jumper
Board Dimensions: 37.57 mm x 35.90 mm (1.48 in x 1.41 in); Note: MyoWare Muscle Sensor and additional accessories may be required.

Ver más

SKU: B09VYGPMP4

Ver Calificaciones

Producto prohibido por la aduana de su país.

Continúa comprando

Este producto viaja > USA > Tus Manos

Más detalles del producto

The MyoWare 2.0 Link Shield is designed to easily connect a MyoWare 2.0 Muscle Sensor to your compatible with Arduino microcontroller. The shield provides a 3.5mm TRS jack so that you can use a 3.5mm TRS-to-TRS cable to link the boards together. The MyoWare 2.0 Link Shield is equipped with snap connectors on the board so you can easily stack it to the top side of the MyoWare 2.0 Muscle Sensor.The board also includes two switches. One is used for power while the other is selecting the output mode for the raw EMG (RAW), rectified (RECT), or envelope (ENV) signal. Two status LEDs are built in for power and the envelope signal. A jumper is also included for reference or ground. You'll need the MyoWare 2.0 compatible Arduino Shield and a development board with the compatible with Arduino Uno R3 footprint to link each MyoWare 2.0 Muscle Sensor and Link Shield stack.Note: MyoWare and the Link Shield are not intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation treatment, or prevention of disease, in a man or other animals. Additionally, this Shield does not include the 3.5mm TRS Cable. This will need to be purchased separately.The MyoWare 2.0 ecosystem consists of shields that easily interface with the MyoWare 2.0 Muscle Sensor, which is a low-cost, compatible with Arduino, all-in-one electromyography (EMG) sensor from Advancer Technologies. The innovative connector system allows users to easily snap shields together with a compact low profile and connect to a microcontroller's analog input to measure raw, filtered, and rectified electrical activity of a target muscle. This eliminates the need to solder connections between boards.This product is a collaboration with Brian Kaminski from Advancer Technologies. A portion of each sales goes back to them for product support and continued development.

Más información para tu compra de 2.0 Link Shield -Connect a...

abrir

¿Cuál es la valoración promedio de 2.0 Link Shield -Connect a...?

La valoración promedio de 2.0 Link Shield -Connect a... es 4 (basado en 8 reviews).

abrir

¿2.0 Link Shield -Connect a... tiene devolución?

Si, usted puede devolver el producto a nuestras oficinas de Miami (USA). Para ello se debe solicitar la devolución en su cuenta de Tiendamia dentro de los primeros 7 días de haber recibido el paquete. Los costos de devolución corren por cuenta del cliente. Más información en Políticas de devolución

abrir

¿A qué tienda pertenece este producto?

2.0 Link Shield -Connect a... pertenece al catálogo de Amazon

abrir

¿Cuánto demora el envío de 2.0 Link Shield -Connect a...?

Los tiempos de envió pueden variar según el producto. Recibí 2.0 Link Shield -Connect a... en tu casa en un tiempo de entre 8 y 12 dias.

abrir

¿Este producto tiene garantía de entrega?

Sí, todas las órdenes están aseguradas para llegar a destino. En caso de no hacerlo en el tiempo estipulado (Courier Privado) o luego de los 75 días de realizado el pedido (Correo Argentino) te devolvemos el dinero. En el caso de Correo Argentino, deberás haber realizado la declaración jurada y el pago de la tasa postal mediante VEP (Volante Electrónico de Pago) en el plazo indicado.

 
 
  Loading...