RATTMMOTOR 300W 12-48VDC CNC Air Cooled Spindle Motor 52mm 0.3KW Spindle Motor 12000RPM 0.4NM+52mm Mount Clamp for CNC Router Engraver Milling Machine (ER11)

Size:

ER11

Disponibilidad
En stock

Peso con empaque
1.28 kg

Devolución
No

Condición
Nuevo

Producto de
Amazon

Sobre este producto

As for the positive and negative wiring of the motor and the power supply, you can connect it at will. Because the motor supports reverse rotation, if you need the motor to rotate forward, just replace the interface.
Power: 300W; Collet: ER11; Voltage: 12-48VDC; Idling Speed: 3000-12000r/min ( 12V-3000RPM, 24V-6000RPM, 36V-9000RPM, 48V-12000RPM ); Torque：400mN.m; Diameter: 52mm. Run outoff: 0.01-0.04mm.
This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time!
With overcurrent protection cut-off device to make performance more reliable; With a soft start device to eliminate motor starting current is too large.
The motor is equipped with ER11 extension rod and collet, which supports engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and other materials.

$112,64

55% OFF

$51,20